The white Electro-Voice ZX5-60 is a 15" 2-way 600W passive loudspeaker offering high-performance, full-range sound reinforcement for installed applications in houses of worship, concert venues, arenas, and stadiums. Use it in your main PA system, expand your fills, or treat it as a floor monitor on stage. The ZX5-60's 15" woofer and neodymium/titanium high-frequency compression driver yield a 58 Hz to 18 kHz frequency response and boast a 600W continuous power handling rating (2400W peak). The high-frequency driver is mounted in a 60° x 60° horn for long-throw and cluster applications.

The ZX5-60 features selectable bi-amp or passive crossover operation, allowing it to be properly driven by one or two power amplifiers. The two Neutrik speakON inputs are wired in parallel to ensure simple, secure connectivity to your power amps and other speakers. The lightweight polypropylene cabinet is outfitted with anchor plates, suspension points, and a carry handle to accommodate a variety of mounting configurations.

For Demanding Live Stage Applications    15" Woofer, Neodymium/Titanium HF Driver    600W Continuous Power Handling    58 Hz to 18 kHz Frequency Response    60° x 60° Coverage Pattern    Adjustable Angle for Floor Monitor Use    Dual Neutrik speakON Inputs    Passive / Bi-Amp Selectable    Anchor Plates, Suspension Points, Handle    Lightweight Polypropylene Cabinet

Two-way 600W full-range passive loudspeaker for mains, fills, or floor monitors

Ideal for installed applications in houses of worship, arenas, and stadiums

15" DVX3150 woofer delivers low distortion with an extended low-frequency range

Forced-air, directional voice coil cooling for high power and efficiency

ND2 compression driver with 2" voice coil, neodymium motor structure, titanium diaphragm, and precision phasing plug offers improved high-frequency performance while the integral heatsink provides cooling

60° x 60° coverage for long-throw and cluster applications

High sensitivity rating of 98 dB and high 132 maximum SPL

Switchable bi-amp or passive crossover operation

Operable as a stage monitor with a 45 or 55° placement angle

Injection-molded, high-impact polypropylene enclosure with powder-coated steel grille

Enclosure features locations for five single-stud attachment plates and 10 forged steel eyebolts

Related Questions and Answers

Q: 1. would this work with a continuous 600w light?

A: The Photek SoftLighter Umbrella with Removable 8mm Shaft (60") is not recommended for continuous lights generating ample amounts of heat. An actual softbox would be better suited for a 600W continuous light.

Q: 2. Will this flash work with the classic Leica M6?

A: Yes, the FUJIFILM EF-60 Shoe Mount Flash will work with the Leica M6 as a manual exposure flash.

Q: 3. What is the diameter of the softbox when open? 18" is 45 cm, whereas it is noted dimensions as 79.8 about 80 cm. Can you elaborate?

A: The Nanlite Forza 60 lantern softbox dimensions opened are as followed 31.4 x 11.3 x 2.6" / 79.8 x 28.7 x 6.6 cm

Q: 4. Will this fit Elinchrom monolights?

A: Yes, this umbrella will fit Elinchrom monolights in the slot just below the flash tube.

Q: 5. Light weight Fuji flash cable

A: If your Fujifilm camera hot shoe is not working you can use the following adapter to attach this flash and trigger the unit from your camera if your Fujifilm camera has a pc sync port. Impact SCS-MPC PC Male to Hot Shoe Sync Cord (12") BH #IMSCSMPC • MFR #SCS-MPC https://www.bhphotovideo.com/c/product/1130423-REG/impact_scs_mpc_male_pc_to.html There is no TTL cable for fujifilm cameras and flash units.

Q: 6. Will this lens hood work on the new Canon EF 70-300mm f/4-5.6 IS II USM?

A: Yes I am using it for horse racing photography. BH recommended it which was very helpful.

Q: 7. Can this flash unit trigger another remote flash?

A: No, according to Fuji's website, the flash is a receiver only.

Q: 8. can this be used with 58mm filters?

A: Yes. The polarizer isn't as easy to rotate, but it can be done.

Q: 9. Will this work with an Elinchrom Style RX monolight? I read an old review from 2004 saying the shaft is actually less than 7 mm and does not stay secure in the Elinchrom 7 mm shaft tube. Maybe this newer version has addressed that issue. Anyone have experience using this umbrella with Elinchrom?

A: The Elinchrom Style RX monolights have a 7mm slot on just below the flash tube and an 8mm adapter where the stand adapter and the light would meet. That being said, this Photek Softlighter Umbrella with the 7mm and 8mm shafts is compatible.

Q: 10. What's the difference between this and the Nissin i60 in term of features?

A: These flashes are very similar, except the Nissin flash head rotates 360 deg opposed to the Fuji which is only 180 deg. The Nissin flash has a video light and has the ability to attach an external battery pack.