The Tiffen 5 x 6" 4 Pink Soft-Edge Graduated Filter helps to specifically add a bright pink coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 4 color density provides less pink coloration than the 5 density, but more than the 3 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 5 x 6" / 127 x 152.4mm.

Note: A vertical orientation filter's line of transition runs parallel to the short side of the filter.

Provides a bright pink coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Will this fit a Sony a6000/a6300 with a Sony 55mm f1.8 lens?

A: Yes, this will fit the Sony A6000 with 55mm f/1.8 lens.

Q: 2. does this have 1 or 2 QD sockets? description says 2 but picutre shows 1

A: This bracket has one QD socket.

Q: 3. Is there a RRS baseplate for the BGR10-L - not a L bracket?

A: There is only the Really Right Stuff Base Plate for Canon EOS R5 and R6 Mirrorless Camera, BH # REBPCER56. https://bhpho.to/2XnTeuA

Q: 4. Would this fit the Sony A7R II, metabones and Canon EF 24-70 f2.8L II USM with lens hood reversed?

A: This is what I can tell you....it does not fit an Nikon P900 well. It was quite tight. Tighter than I want. I believe it would fit a Sony A7RII with a small lens.

Q: 5. Will this fit the Fuji XT2 with battery grip, RRS L-plate & 16-55 attached?

A: It fits a Nikon Coolp 900 fine, and a Nikon D7100 w/60 mm Macro attached (very tightly), so the battery grip &c. sounds problematic.

Q: 6. Is this bracket really modular with a removable side piece as stated in the description? From what I've read on the RRS website and elsewhere, this is a one piece unit that allows the L side piece to slide away from the camera but not be completely removed. Apparently, this was a RRS design decision that has caused some consternation among RRS fans.

A: The description has been corrected to reflect that the bracket is a single piece, not modular.

Q: 7. what is the diameter of the lens portion of the case? Is there a maximum diameter for a lens inserted in the sleeve? I want to make sure it will fit the lens hood of my Tokina 11-16 mm lens.

A: It looks like the diameter is 3 inches.

Q: 8. I have a Manfrotto tripod/head. I noticed they don't have an L plate for the R5 with or without battery grip. If you look at the review on this same page titled "Fits perfect" by Brian, you'll notice he has this RRS L bracket and using it with a Manfrotto tripod/head in the photos he submitted. How can this be achieved?

A: On top of the Manfrotto quick release plate you can screw on this arca compatible clamp and then on top of the clamp you can place the RRS L bracket, since the RRS L bracket is also arca compatible. https://www.bhphotovideo.com/c/product/1026970-REG/sunwayfoto_mac_14_arca_manfrotto_compatible.html

Q: 9. Will this work with the R5 MkII + BG-R20 grip? I am primarily a photographer and may not require the articulating screen much.

A: The Really Right Stuff EOS R5 and R6 with BG-R10 Vertical Battery Grip L-Plate is not fully compatible with the Canon R5 Mark II and the BG-R20 grip. If you want the bracket to fit like a glove, I recommend waiting for the L-bracket that is specifically made for that camera and battery grip.

Q: 10. can use with R5C with battery grip ???

A: Yes, the Really Right Stuff L bracket is designed for the EOS R5 and R6 to be used with the BG-R10 Vertical Battery Grip.