The Tiffen 5 x 6" 2 Tobacco Soft-Edge Graduated Filter helps to specifically add a warm, brownish-yellow coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 2 color density provides less tobacco coloration than the 3 density, but more than the 1 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 5 x 6" / 127 x 152.4mm.

Note: A vertical orientation filter's line of transition runs parallel to the short side of the filter.

2 Density Color Graduated Filter    Tobacco Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a warm brownish-yellow coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Is this bracket really modular with a removable side piece as stated in the description? From what I've read on the RRS website and elsewhere, this is a one piece unit that allows the L side piece to slide away from the camera but not be completely removed. Apparently, this was a RRS design decision that has caused some consternation among RRS fans.

A: The description has been corrected to reflect that the bracket is a single piece, not modular.

Q: 2. Will this fit a Canon R6 with a 100-400mm attached?

A: Yes, the OP/TECH USA D-Pro Tele Digital D-Series Soft Pouch (Black) is large enough to fit a Canon R6 with a Canon RF 100-400mm f/5.6-8 IS USM Lens.

Q: 3. Will this case fit the Fujifilm X-T30 with the 18-55 mm kit lens?

A: The proper case for a Fuji X-T30 with the 18-55mm Kit lens is the OP/TECH USA D-Midsize Digital D-Series Soft Pouch (Black), B&H # OPDDMPB. https://bhpho.to/2ARaOt7

Q: 4. Will it fit GH5 with 14-140 lens. Also with a spider hand strap.

A: Hi Brian, We feel that it may be a bit too tight in the D-Midsize version and think it is better suited for the D-SLR version (7401094 D-SLR Black 6" x 4.5" x 6" (15,2cm x 11,4cm x 15,2cm)). I apologize that I can't speak to the compatibility of the spider hand strap. Thanks again for your interest in our products. Cheers!

Q: 5. Will this fit my Fujifilm X-E2 with L-plate and 35/23mm primes? Thank you.

A: With the L-plate and the 35/23mm prime lens, the OP/TECH USA Rangefinder Soft Pouch BH #OPSPRB is a better option for your FujiFilm X-E2. https://bhpho.to/3Jkdyld

Q: 6. How about a Sony a7ii w/ 24-70 f4?

A: I bought this for my A7ii/now A7iii with my 24-240. I have to stretch it for that lens but works very well with my 24-70 kit lens.

Q: 7. Will screen still be fully articulated and tilting?

A: Yes the LCD screen on the EOS R5 and R6 will have full articulation when using this L-bracket.

Q: 8. Will this fit a Canon EOS R with BG-E22 Battery Grip?

A: Yes. The following unit will accommodate both the EOS R5 and R6 with BG-R10 Vertical Battery Grip L-Plate.

Q: 9. I have a Manfrotto tripod/head. I noticed they don't have an L plate for the R5 with or without battery grip. If you look at the review on this same page titled "Fits perfect" by Brian, you'll notice he has this RRS L bracket and using it with a Manfrotto tripod/head in the photos he submitted. How can this be achieved?

A: On top of the Manfrotto quick release plate you can screw on this arca compatible clamp and then on top of the clamp you can place the RRS L bracket, since the RRS L bracket is also arca compatible. https://www.bhphotovideo.com/c/product/1026970-REG/sunwayfoto_mac_14_arca_manfrotto_compatible.html

Q: 10. Will a Nexstar 6 Evolution fit in this bag while still attached to its mount?

A: The Celestron Padded Soft Telescope Bag for 9.25" SCT/EdgeHD OTA is too small to fit the Celestron Nexstar Evolution 6 attached to the mount. You can use this case instead: https://bhpho.to/3WMjWdP