The Tiffen 3 x 4" 1 Plum Soft-Edge Graduated Filter helps to specifically add a warm, pale purple coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 1 color density provides less plum coloration than the 2 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 3 x 4" / 76.2 x 101.6mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

1 Density Color Graduated Filter    Plum Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a warm pale purple coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Will this fit Nikon Z7 with FTZ Adaptor and 70-200 f2.8 Nikon lens? How about with the Kirk Photo replacement foot attached rather than the Nikon supplied foot?

A: Thanks for your question. The Nikon Z7 actually fits in our D-Midsize pouch; however, your lens is too big to fit in this case. We don't make any cases to fit a lens of that size when attached to the camera. We do offer lens pouches when storing the lens separately (Snoot Boot) and you could have your camera body stored in our Soft Pouch-Body Cover-Midsize or Midsize-Pro if you have the extended battery grip. I'm sorry that we don't manufacture exactly what you're looking for. Cheers!

Q: 2. will this fit the sony dsc-rx10 III without lens hood reversed?

A: Yes, it will fit the Sony Cyber-shot DSC-RX10 III camera.

Q: 3. Will this fit a Canon 80D with 300mm + 1.3x extender?

A: The answer would depend on which 300mm you are considering. If you already have the Canon 80D with a 300mm + 1.3x extender, measure the combination. If those numbers are 1/2 less than the pouch's exterior dimensions of 6.0 x 6.5 x 11.0 (15.2 x 16.5 x 27.9 cm) we feel you are good to go.

Q: 4. Which size best fits the Leica Q2?

A: The OP/TECH USA Rangefinder Soft Pouch will fit the Leica Q2. The link for that is: https://bhpho.to/3ocN5QE.

Q: 5. Which case will fit an OM-d with 40-150mm pro lens plus teleconverter? The lens and teleconverter are 8.5" together

A: No, the OP/TECH USA D-Midsize Digital D-Series Soft Pouch cannot hold an Olympus OM-D with a teleconverter and the OM SYSTEM M.Zuiko Digital ED 40-150mm f/2.8 PRO Lens. Try the DSLR Zoom option for a better fit: https://bhpho.to/4ayFnmz

Q: 6. Will this fit the Fuji XT2 with battery grip, RRS L-plate & 16-55 attached?

A: It fits a Nikon Coolp 900 fine, and a Nikon D7100 w/60 mm Macro attached (very tightly), so the battery grip &c. sounds problematic.

Q: 7. Would this fit my 7d 24-70 2.8L?

A: I don't have 7d 24-70 2.8L but my Df with 50mm 1.8 barely fits, I haven't been using it since purchase. It's sized for consumer grade dslr with kit zoom or mirror less camera.

Q: 8. Would this fit the Canon EOS 70D with 18-135 f/3.5-5.6 STM Lens?

A: Yes, this will fit the 70D and 18-135mm lens.

Q: 9. Is the included speed ring OCF compatible? (e.g., Profoto BX10 Plus)

A: The speed ring included with the purchase of the Mola Setti Komplette with Case for Profoto, B&H # MOMSK02, would be compatible with Profoto light fixtures that use OCF speed rings. However, do note that the Mola Setti Komplette with Case for Profoto weighs 20 lb, so you need to ensure that your specific light fixture and your light stand can accommodate the weight of this light modifier.

Q: 10. What's the exit angle of the Demi without any extra diffusion or grid?

A: Hi Juan: Unlike a simple parabola the Demi is difficult to calculate a specific angle. The Demi’s undulating surface changes the angle at several points through the reflector curvature. As well flash tube styles and location make this calculation difficult. Therefore it does not have a quantifiable angle as such.