The Tiffen 3 x 4" 3 Plum Hard-Edge Graduated Filter helps to specifically add a warm, pale purple coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a hard-edged transition between the density and clear areas. The 3 color density provides more plum coloration than the 2 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 3 x 4" / 76.2 x 101.6mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

3 Density Color Graduated Filter    Plum Coloring in Select Areas    Hard-Step Graduation    ColorCore Technology

Provides a warm pale purple coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Does it works w/ Canon 1Dx mk II ?

A: DJI RONIN S Works any DSLR cameras

Q: 2. Can Ronin SC be used with Panasonic Lumix DMC-LX100?

A: Weight wise, it will be fine, but in terms of using additional functions, we would recommend taking a look at the compatibility chart offered on the DJI site: https://bit.ly/37eaS7y

Q: 3. Does this have a screw mount on the bottom of the handle for connecting to tripod plate or monopod?

A: Yes. There's a 1/4 inch hole and an additional hole for mounting the Ronin to any number of devices

Q: 4. What are the differences between this unit and a href= http://www.bhphotovideo.com/c/product/1123837-REG/g_technology_0g04085_g_raid_thunderbolt_2_usb_3_0.html target= _blank http://www.bhphotovideo.com/c/product/1123837-REG/g_technology_0g04085_g_raid_thunderbolt_2_usb_3_0.html/a ? Enterprise drives? Is that why the speeds are faster on the more expensive model?

A: Hi, the first one you mention has Thunderbolt 1 ports, and is configured as a software RAID.The link to the removable unit, this is a newer product with Thunderbolt 2 ports, utilizes a hardware RAID, and the drives are actually removeable.

Q: 5. A few questions pertaining to the canon 80D:-With a standard 18-135 usm lens thats included with the canon 80D, will it be able to be balanced?-Will the Ronin S be able to connect to the Canon 80D and wirelessly start and stop video with the record button on the ronin s?-will half pressing the record button on the ronin S re-autofocus the Canon 80D?-will the focus wheel module built into the Ronin s be able to pull focus of the 18-135 USM lens connected to the 80D?

A: The 18-135mm is not on DJI's list of tested lenses. It may work, but they have not yet tested the lens on the Ronin-S. You will be able to start and stop recording through the Ronin-S, take photos and it will pull focus.

Q: 6. I have the new Ronin-s essentials with a Sony A 7III and can't get this thing to too stable to film in car. How can I fix this stability issue?

A: Balance is key to successfully operating this or any gimbal. Before shooting you must make sure that it is perfectly balanced as shown in the instructions for the gimbal. It will not be properly balance until when the unit is turn off and you turn the camera in any direction, it stays there. If you are properly balanced and still getting jerky movements when shooting in very fast situations, you may want to try the DJI Ronin-S External GPS Module B&H # DJGPSP21. This allows for better responsiveness to quick movements. https://bhpho.to/2KNVTGw

Q: 7. How about Canon 5d Mark lll with 24 70 2.8 ? (3)

A: The DJI Ronin-S will work with the Canon 5D Mark ii and a 24-70 2.8 lens.

Q: 8. Does this work with the D810 audio focus?

A: I assume you mean autofocus in which case yes.

Q: 9. warrentee?

A: This comes with a manufacturers limited 3-Year Warranty.

Q: 10. Shipping weight and dimensions for the entire combo? Thanks!!!

A: This is a B&H Kit, the products will come in their own boxes. The DJI Ronin-S is packed in a box that is 13.5 x 7 x 6.5 Inches and weighs 8.5 pounds. While the case is 18.9 x 15.2 x 6.8 and weighs 7.8 pounds.