The Tiffen 5 x 6" 2 Cranberry Hard-Edge Graduated Filter helps to specifically add a magenta-like, pinkish-red coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a hard-edged transition between the density and clear areas. The 2 color density provides less cranberry coloration than the 3 density, but more than the 1 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 5 x 6" / 127 x 152.4mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

2 Density Color Graduated Filter    Cranberry Coloring in Select Areas    Hard-Step Graduation    ColorCore Technology

Provides a reddish magenta coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Canon 7D will be supported?

A: Yes, the Canon 7D is supported with the Ronin-S.

Q: 2. Can the Canon T3i with Canon lens EF 75-300mm f/4.0-5.6 & lens EF-S 10-18mm f/4.5-5.6 be used on the Ronin-S?

A: The longest telephoto lens that DJI has tested to work with a Canon camera on the Ronin-S is 85mm, the 75-300mm may not balance properly. However the 10-18mm should balance fine with the T3i on a Ronin-S.

Q: 3. Can the Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate (501PL) be mounted to the Ronin S?

A: You can mount the quick release assembly above the DJI Ronin S quick release plate as well as mount the 501PL plate provided with the assembly under the handle.

Q: 4. Does this have a screw mount on the bottom of the handle for connecting to tripod plate or monopod?

A: Yes. There's a 1/4 inch hole and an additional hole for mounting the Ronin to any number of devices

Q: 5. is this compatible with canon rebel t3i?

A: Hi Steven, the Ronin S will work with any Canon Camera, the Focus control won't work, shutter and Start/Stop will work via MX RSS Cable for Canon, if the T3i has the remote control sensor. I use it with my Canon 80D and it works wonders.

Q: 6. experiences with gh4 and ronin s?

A: The GH4 will work very well with the Ronin-S. DJI will also be released an optional RSS-P cable that will allow for Start/Stop Record, Capture Photo and Triggering the Auto Focus with the GH4.

Q: 7. Can it balance and handle a 1DX?

A: Ronin-S can carry a maximum payload of 8lbs and according to our tests, the Ronin-S can capture stabilized footage with a 5D Mk IV + EF 85mm f/1.4L IS USM lens

Q: 8. Can the Ronin-S take multi row panorama photos ?

A: Hey Kmat. Please stay tuned for more information as product specifications are released!

Q: 9. What is the difference between the essential kit and the Ronin S kit?

A: The Ronin-S itself is the same in both kits, however the standard kit will come with a Metal Tripod instead of the Plastic Tripod in the Essentials kit and it will come with more accessories. Both Kits come with the following items: Battery Grip, Camera Mounting Plate, USB Type-C Cable, Lens Support, Camera Riser, Touch Faster Strap for Gimbal, Storage Cage, 3 x 1/4"-20 Screws, 1 Year Warranty on Gimbal and a 6 month Warranty on the Motors. The Standard Kit comes with these as well: Focus Wheel, IR Control Cable, USB-C Camera Control Cable, USB Micro-B Camera Control Cable, 24W USB Power Supply, Accessory Box, Hex Key and Touch Faster Strap for cable.

Q: 10. Can I use my XC15, with the audio unit, shotgun mic and a Seenheiser receiver attached? Would that setup be too top heavy? Also can I keep my Benro tripod quick release plate on the bottom of the camera so I can swap it to my tripod without any hassles?

A: A camera with an unusual shape like the XC15, combined with multiple audio accessories in our opinion will not balance on the Ronin-S. We do not recommend it. As for the quick release plate that would depend on the exact model of tripod you have. Feel free to email us directly at askbh@bhphoto.com for further assistance.