The Tiffen 4 x 5" 2 Red Hard-Edge Graduated Filter helps to specifically add a warm, bright red coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a hard-edged transition between the density and clear areas. The 2 color density provides less red coloration than the 3 density, but more than the 1 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 4 x 5" / 101.6 x 127mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

2 Density Color Graduated Filter    Red Coloring in Select Areas    Hard-Step Graduation    ColorCore Technology

Provides a bright red coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Can I pan the camera with this tripod, I mean separately from the ball head? Thank you!

A: yeah there is a seperate pan below the ball head

Q: 2. Where it made? Is there any other tripot lighter than this one?

A: Did you want to know where was the tripod made? It is made in China. I have used it in several occasions, it is light weight and it suits perfectly my A6000 and telephoto zoom lens 100 - 300 mm. I am sure there a lighter tripods, but probably made of carbon fiber and considerably more expensive

Q: 3. the specs on this printer indicates it can do "duplex printing" which means it would print one side of a page, followed by the reverse side of a page. Mechanically how does the printer turn the page over and prints the other side?

A: The Canon PIXMA MG3620 would do this automatically using the rollers to feed the paper back into itself, flip it and then print on the backside.

Q: 4. Do I have to have a computer to set up?

A: I can print from my Ipad but NOT on an 5G network.

Q: 5. Is the top compartment separated from the larger, bottom compartment? And if it is, would it be possible to run cavles from the top - compartments? I want to use this as an audio recording bag with my Schoeps microphones and Sound Devices Mixpre Series recorders! TIA!!!

A: Yes, the top divider is removable on teh USA GEAR USA Gear S17 DSLR Camera Backpack. If you only need to run cables through the top and bottom compartment you can do so since the divider attaches to the backpack wall with Velcro tape.

Q: 6. Will it hold a 5D mark Iii with a 70-200 is USM lens?

A: It will hold your gear but will not be stable enough, the load capacity dictates a lighter camera/lens system, like a mirrorless camera with a lightweight lens.

Q: 7. Can you fax

A: Faxing is not a feature of this item.

Q: 8. Does anybody know what the measurements for the laptop compartment are?

A: USA GEAR S17 DSLR Camera Backpack (Black/Orange Interior) laptop compartment dimensions are 16.5 x 10.5" .

Q: 9. Is there a way to replace the screw that mounts the plate to the ball head? This ballhead has a screw that comes out making it impossible mount other arca plates. Are you guys aware of a place that sells low profile bolts even if not authorized to be replaced...if we want to risk it?

A: The screw for mounting the QR clamp is an integral part of the ball in the ball head--there is no way to change the screw itself.

Q: 10. Is the head on the Roadtrip S the same or is it larger than that on the Backpacker S?

A: The Q1G head included with the MeFOTO Roadtrip S is only slightly larger than the Q0G head included with the MeFOTO Backpacker S.