The Tiffen 5 x 6" 1 Straw Hard-Edge Graduated Filter helps to specifically add a warm, golden yellow coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a hard-edged transition between the density and clear areas. The 1 color density provides less straw coloration than the 2 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 5 x 6" / 127 x 152.4mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

1 Density Color Graduated Filter    Straw Coloring in Select Areas    Hard-Step Graduation    ColorCore Technology

Provides a golden yellow coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. the carry case isnt styrofaom is it??

A: Yes it is. The case it comes with is Styrofoam.

Q: 2. I will be using this with the canon 1DXMii.1. Will I be able to use all full functions with my camera like Timelapse?2. Which cable do I need to connect my camera to the Ronin-S?3. Do I need a specific quick release plate to mount my camera to gimbal? Which plate do you recommend what dimensions ?

A: From the manufacturer, Thank you for contacting DJI technical support.Upon checking Canon EOS-1D X Mark II is compatible with Ronin-S use the MCC Type B cable to make it work. You can also enjoy the pull focus feature by using the agreed and compatible lens that show on the picture below.All feature will work please use the link below to view manual on how to use the other featuresa href= https://dl.djicdn.com/downloads/Ronin-S/Ronin-S%20User%20Manual_v1.0.pdfFinally. target= _blank https://dl.djicdn.com/downloads/Ronin-S/Ronin-S%20User%20Manual_v1.0.pdfFinally./a The following Quick-Release plate would allow you to mount your camera to the gimbal. E-Image EH6P Quick Release Plate B&H # EIEH6P MFR # EH6P.From CanonThank you for contacting Canon regarding your customer's questions about using the EOS-1D X Mark II with the Ronin-S. I will be glad to assist. Here at Canon technical support, we don't have extensive details about how our equipment will work with accessories we don't make. Nor can I claim to be an expert on how the DJI Ronin-S works. That said, I will answer based on the specs I've seen for that device. As far as I can tell, the gimbal does not seem to override the camera's menu options or other features, so someone should still be able to do a timelapse by connecting the optional TC-80N3 to the camera's N3 port on the side. While some of our cameras have built-in time-lapse capabilities, the EOS-1D X Mark II does not. That said, I wouldn't recommend doing a time lapse on a gimbal, since gimbals are designed to allow for fluid motion, while time-lapses work best when the camera is locked down on a sturdy mount. The specs on the Ronin-S indicate that it has mounting that allows a 1 x 1/4 -20 Female Thread, which is what the camera uses. As far as I can tell, you shouldn't need other cables to connect the camera, but you may wish to check with DJI to see if they have additional recommendations. Let us know if we can be of further assistance.Thank you for contacting Canon, and I hope you have a good day. Sincerely,NickTechnical Support Representative

Q: 3. Is the ronin s weatherproof? I just saw a promo of it shooting in snow/rain.

A: No the Ronin-S is not waterproof or water resistant. Although we do not recommend any contact with water without external protection, the Ronin-S will not immediately break when in contact with light moisture. Water damage is not covered under warranty.

Q: 4. will it work with the z150?

A: Because of the design of the Sony Z150 it would be better to use counterweight stabilizers with a wider and more open platform, here is a good option from Glidecam for example: https://bhpho.to/2gOyg2v

Q: 5. Hi, do you know if it would carry an a7s ii with Sony FE PZ 28-135mm f/4 G OSS Lens? I have not seen it in the compatibility list, have you tried by any chance?

A: According to our tests, the Ronin-S can capture stabilized footage with a 5D Mk IV + EF 85mm f/1.4L IS USM lens in handheld scenarios. Your described lens may be too front heavy, but it's hard to say without testing that setup specifically.

Q: 6. Can Blackmagic Pocket Cinema 4k be used on this one?

A: Hi Sun, The Ronin-S is capable of carrying many camera systems, and the Blackmagic Pocket Cinema 4k will be able to be balanced on the gimbal. However, the functionality of focus control and start/stop of the shutter is not currently available for this camera.

Q: 7. Will this be able to balance with 11-24L on 5dmkiii?

A: Ronin-S can carry a maximum payload of 8lbs and according to our tests, the Ronin-S can capture stabilized footage with a 5D Mk IV + EF 85mm f/1.4L IS USM lens.

Q: 8. Does it work with the Sony a7r iii?

A: The gimbal supports the weight of the A7Riii if that is what you are asking. It does NOT support the focus control knob for manual focus pulling. It does however support triggering of the shutter/video with an infrared cable supplied with the Ronin.

Q: 9. can you please assist me with required voltage for power supply(cord)?

A: 110 volts

Q: 10. Can I power Sony a6500 with Ronin S?

A: The Ronin S has two 12v/2A four pin outlets built in to the base plate shoe. You can power anything that takes that kind of power and has an adapter cable.