The Ambient Phantomizer 48V Phantom to 12V T-Power Converter is an in-line cable that converts 48V phantom power to 12V T-power (also known as "A-B power") for use with low-power mics. This passive converter patches directly to your XLR cable and needs no addtional current to operate.

The Phantomizer is a passive converter consisting of a voltage divider and a capacitor to block the direct current from pin 3. If your mixer or preamp is sending 48V to your mic by default but you need 12V A-B Power, the Phantomizer can fix that.

The Phantomizer does its work with no bulky extras to lug around. Add the in-line converter to your XLR cable and you're done.

Related Questions and Answers

Q: 1. Does this sign display on both sides? I need one that can display the word "recording on both sides.

A: Unfortunately it does not. This only works on one side.

Q: 2. will this work with any pentax 55mm lens with 52mm diameter?

A: No. The following unit is made and designed specifically designed for use with Pentax's 18-55mm f/3.5-5.6 (non-WR) lens.

Q: 3. Does it fit the ProMedia Gear TR424L? As the load capacity is a lot higher than of the TA-3, I would prefer the TA-4.

A: I'm sorry but you will have to use the TA-3. The TA-4 is not compatible

Q: 4. Will the TA-4-LB-HK fit a Gitzo GT5563GS Systematic Series 5 Carbon Fiber Tripod ?

A: The following is needed, be mindful that the system will adapt to a 75mm bowl drop. Gitzo SYSTEMATIC 75mm Bowl Head Adapter for Series 5 Tripods BH #GIGS5321V75 • MFR #GS5321V75 https://bhpho.to/2SbifSv

Q: 5. Is this the proper Leveling Base for the RRS TVC 44 tripod?

A: The Really Right Stuff TA-4 Leveling Base with 4.5" Handle and Hook is compatible with the Really Right Stuff TVC-44 Versa Series 4 Mk2 Carbon Fiber Tripod.

Q: 6. Does it fit the ProMedia Gear TR424L tripod?

A: I'm sorry but this tripod utilizes a 75mm bowl and the RRS base is for a 100mm bowl. I would recommend the RRS TA-3 base. Please click on the link below to view; https://bhpho.to/2ArR81v

Q: 7. Will the RRS TA-4-LB-HK fit an FLM CP-38 - L4 II 10X Carbon Fiber Series II tripod?

A: The Really Right Stuff TA-4 Leveling Base should work, but its 30 degree tilt, combined with the protruding bubble level, may prevent it from being fully compatible with anything other than a RRS tripod. If you are looking for an option that is designed for use with the FLM CP38-L4 II 10X Carbon Fiber Series II Tripod, the FLM HB-100 Half Ball for CP38, B&H # FLHB100, would be compatible for your usage needs. As an additional alternative, the FLM HB-75 Half Ball Leveler for CP34 and CP38 Tripod Legs, B&H # FLHB75, along with the FLM Adapter to Use HB-75 on CP38, B&H # FL75100ADPTR, would also be a combination that would work with the aforementioned tripod.

Q: 8. Are there any 50 lb capacity leveling bases by RRS that do not require a video head?

A: The Really Right Stuff TA-4 Leveling Base doesn't require a video head, it can be used with a ball heads and gimbal heads as well. You would remove the top plate of a RRS tripod, and set this in that spot.

Q: 9. Is there something that can make the 100mm bowl go down to a 75mm bowl

A: Yes, click the link below to view; https://bhpho.to/3fUvBPp

Q: 10. Does the TA-4-LB-HK need a separate 100mm video bowl to install on the TVC-45 Tripod Apex?

A: No.