The Tiffen 2 x 3" Center Spot Filter is a softening filter that allows you to maintain sharp, clear focus in the center of the image while blurring the perimeter of the frame. This helps to isolate your central subject matter while softening the surrounding areas.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 2 x 3" / 50.8 x 76.2mm.

Maintain Central Focus and Soften Edges    Isolate Subject Matter    ColorCore Technology

Clear central area of the filter keeps subjects in the middle of the frame in focus while softening surrounding areas.

Helps to isolate subject matter and lessen distracting backgrounds.

Related Questions and Answers

Q: 1. Will this fit a Godox QT600II with the glass protection cover on?

A: The Godox VSA-36° Spot Lens is designed for LED lights under 300w. It can not be used with a QT600II.

Q: 2. Can I use this with a Canon EF 50mm 1.8? If not what cheap canon lens would you recommend to use this with?

A: Yes. A canon 50ef mount lens will mount, for better end-user experience unit is equipped with a 100mm lens for better distance projection.

Q: 3. Can I purchase the Bowens mount plate? I already have the Broncolor version.

A: Yes. Please contact Westcott parts department. 1-800-886-1689

Q: 4. Is this product compatible with Smallrig 350B (B&H # SM3965)?

A: We do not recommend using the Godox VSA-36° Spot Lens with the Smallrig 350B because the limit on the spot is 300 watts and can result in heat problems. However, we suggest the Nanlite Projection Attachment for Bowens Mount with 36° Lens as a safer alternative. The B&H product #NAPJBM36 https://www.bhphotovideo.com/c/product/1679010-REG/nanlite_pjbm36_projection_attachment_for_bowens.html/qa?sts=pi

Q: 5. It says 300W max for the video light. what is the max wattage for strobe that can be used with it?

A: The Godox VSA-36° Spot Lens was designed for use with LED lights. Unfortunately, Godox does not specify a maximum wattage for strobe light usage with the Godox VSA-36° Spot Lens.

Q: 6. Can this be used to project a photo (with a transparency/photo gobo)?

A: The Westcott Optical Spot by Lindsay Adler for Bowens BH #WEOSLABWNS could project an image from a transparent gobo.

Q: 7. I plan to use this with a Genaray Radiance Daylight LED Monolight. Is this possible to do without damaging the equipment.

A: Yes, the Westcott Optical Spot by Lindsay Adler for Bowens will mount to the Genaray Radiance Daylight LED Monolight. However, it is optimized for strobe lights not continuous lights.

Q: 8. Which one of these will fit Impact strobes (VC-500WLN)? Typically Bowen speed rings fit on them, so would the Bowens model be the appropriate one to buy?

A: Yes. The following system will attach via Bowens mount system as it is dedicated to the Bowen mount system.

Q: 9. Is this can work with godox sk300??

A: Yes, that will work on the SK300 and SK300 II. It no more than 600 watts and has a Bowens S mount. Note, you should not use the modeling lamp on the strobe. It is 150 watts and is not made for the heat that produces.

Q: 10. Will this fit on the Aputure LS 600d Daylight LED Monolight?

A: The Westcott Optical Spot by Lindsay Adler for Bowens BH #WEOSLABWNS can only be used with LED to 100w.