The 1-stop, 5 x 6" Tiffen Hard-Edge (Horizontal Orientation) Graduated ND Filter is a graduated neutral density filter that helps to specifically darken skies and other bright areas of the image. The filter is densest at the edge and tapers to clear by the middle, with a hard-edged line of transition between the density and clear areas. Neutral density filters do not affect the coloration of the image and the 0.3 optical density provides a 1-stop reduction in light from entering the lens.

This filter is constructed from Water White glass and is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 5 x 6" / 127 x 152.4mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

0.3 Optical Density    ColorCore Water White Glass    Reduce Exposure in Selective Areas

Hard-edged 0.3 ND graduated filter for darkening skies and other bright areas of the image.

Provides a 1 stop reduction in light in selective areas.

Neutral density filters do not affect the overall coloration of the image.

Water White optical glass for excellent clarity.

Related Questions and Answers

Q: 1. Which controls (start/stop recording, follow focus etc.) would be available in a RoninS/BMPCC 4K/PanaLeica 12-60mm combination?

A: Currently no internal compatibility with the BMPCC 4K have been developed, though we are currently working on expanding the compatibility list to include as many cameras as possible.

Q: 2. Does the DJI Ronin-S work with the DJI Zenmuse X7 Camera and 3-Axis Gimbal?

A: Hey Tom. No, the Ronin-S is only designed to be used with DSLR and mirrorless cameras.

Q: 3. I own a Nikon D750 with 24-120 mm lens, including 35, 85 and 50 mm fixed aperture lenses. Is this stabilizer appropriate for my kit with these lenses or is it really more suited for a mirrorless camera?

A: The Ronan-S has an 8 lb Payload, which makes it suitable for DSLR cameras like the D750.

Q: 4. Can the arm be rotated so that the tilt motor (one to the side of the camera) be on the left side of the camera rather than the right side?

A: No, the tilt motor will always be on the right side of the camera.

Q: 5. The follow focus works for the Sony a7s ii?

A: Sony camera's cannot do follow focus at this time. However, there is going to be a separate motor for pulling focus with any camera and lens. Here is the compatibility chart. https://bit.ly/2Mi3Th2

Q: 6. Does the Ronin S essentials Kit cable compatibility with Sony a7iii or I have to buy another cable?

A: Unfortunately it does not. You would need to purchase BH #DJRONINP13CB which is the control cable for the Sony A7iii. https://bhpho.to/2KuHQ7Y

Q: 7. Will the ronin-S compatible with canon 70D?

A: Yes, the Ronin-S is fully compatible with the 70D.

Q: 8. I use L-Plate from Really Right Stuff with my 5D mark IV, do I need to remove the plate whenever I use the Ronin-S ?

A: Though we haven't tested this setup specifically, there doesn't seem to be any issue using that plate with your camera and Ronin-S. As Kip C insightfully mentioned, it will raise your camera up enough that the lens support may not being to make contact with your lens.

Q: 9. Will the Ronin-S work with the Canon XA40 Professional UHD 4K Camcorder?

A: Yes, the Ronin-S will handle the Canon XA40's weight.

Q: 10. Hi. Is there a way to attach a wireless follow focus to this gimbal?

A: I do not recommend it for the balance