The Tiffen 2 x 2" 4 Yellow Hard-Edge Graduated Filter helps to specifically add a warm, bright yellow coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a hard-edged transition between the density and clear areas. The 4 color density provides less yellow coloration than the 5 density, but more than the 3 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 2 x 2" / 50.8 x 50.8mm.

4 Density Color Graduated Filter    Yellow Coloring in Select Areas    Tropic Blue Coloring in Select Areas    ColorCore Technology

Provides a bright yellow coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Does it work for Nikon D500 + Nikon 16-35 mm len?

A: Yes, this will be able to balance and shoot with a D500 and that lens.

Q: 2. I know this isn't official, but does anyone have experience with the follow focus dial working with a GH5s, Metabones SB, and 3rd party lenses, like a Tamron 24-70 f2.8 G2, or Canon 35mm f2?

A: I don't have Canon lenses but I do have Canon mount sigma lenses with Metabones SB, and yes the follow focus works on the GH5. Make sure your auto focus is set to on the lens itself.

Q: 3. Will this case fit: B&H #SEFSSDUC500G ? If not, what case will?

A: No, unfortunately this would not fit the SEFSSDUC500G . However (9RUHPNPVB) would be a great fit.

Q: 4. Does it support SSDs? Does this include the storage drives as well or we are expected to purchase them?

A: This is a self contained unit. There are two, 2TB drives included, and configured in a RAID 0 setup. It does not support alternate drives, Solid State or otherwise.

Q: 5. Is there a setup/cable available that will support the following on Sony A& III: record stop/start, shutter release, aperature, shutter speed and ISO control?

A: There is not a cable that allows all of those things to be controlled on an A7III camera. However you can use the DJI Ronin-S Multi-Camera Control Cable (Sony Multi-Port) to control start/stop record and aperture, BH #DJRONINP13CB. https://bhpho.to/2DZF5sE

Q: 6. Can this unit be connected to my 4TB G-Technology 4/4000 in order to expand my total storage to 8TB?

A: If your current drive has firewire it can be daisy chained. It will appear as a separate drive though.

Q: 7. does it work with Canon T2i?

A: Yes

Q: 8. Is there enough space to open the camera (Sony Mirrorless) slot battery without removing the camera from the ronin?

A: On all the cameras we have been using we have been able to access the battery by sliding by sliding the camera back. Some did not require this, but most did. We can't confirm this is possible with every setup.

Q: 9. What brand drive is installed?

A: The data sheet for the G-RAID only lists 7200rpm Enterprise drives. Many are HGST drives.

Q: 10. I use L-Plate from Really Right Stuff with my 5D mark IV, do I need to remove the plate whenever I use the Ronin-S ?

A: Though we haven't tested this setup specifically, there doesn't seem to be any issue using that plate with your camera and Ronin-S. As Kip C insightfully mentioned, it will raise your camera up enough that the lens support may not being to make contact with your lens.