The 2-stop, 4 x 5.65" Tiffen Soft-Edge (Horizontal Orientation) Graduated ND Filter is a graduated neutral density filter that helps to specifically darken skies and other bright areas of the image. The filter is densest at the edge and tapers to clear by the middle, with a soft-edged line of transition between the density and clear areas. Neutral density filters do not affect the coloration of the image and the 0.6 optical density provides a 2 stop reduction in light from entering the lens.

This filter is constructed from Water White glass and is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 5.65" / 101.6 x 143.5mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

0.6 Optical Density    ColorCore Water White Glass    Reduce Exposure in Selective Areas

Soft-edged 0.6 ND graduated filter for darkening skies and other bright areas of the image.

Provides a 2 stop reduction in light in selective areas.

Neutral density filters do not affect the overall coloration of the image.

Water White optical glass for excellent clarity.

Related Questions and Answers

Q: 1. I’ve recently ordered the basic Tilta cage (BMPCC4k) with the top handle and ssd holder. Will this side handle work directly with that cage or will I need the Tilta base plate?

A: the handle could directly attached to the full cage

Q: 2. Will this work with a DJI Focus Motor?

A: No it will not.

Q: 3. May I personalize (engrave name) on the camera body?

A: Unfortunately, B&H does not offer personal engravings for the Canon EOS R6 Mark II Mirrorless Camera or other camera bodies.

Q: 4. whats the max input the handle can hold for battery? can you confirm with the manufacturer? im wanting to use a dummy battery plugged into vmount to hopefully allow 14v to csarry through the usbc to power and control the nano

A: this is designed to take up to 7.4V via the battery slot. The batteries that fit this product are typically 7.2-7.4V if you have a Dummy battery it should regulate the power down the 7.2-7.4V for you. check to see if your dummy battery regulates the power (most of them do).

Q: 5. Looking for a top loader/holster type bag with about 10" internal depth to fit a R6Mll with 24-104L and Peak Design Lite strap?

A: You can try the BEVISGEAR Top Shelf Digital SLR Camera Backpack (B&H # BETSCB001).

Q: 6. Can you control the frame rate with the electronic shutter?

A: Yes, with Canon EOS R6 Mark II Mirrorless Camera you can set it to electronic shutter and under high speed continuous shooting+ it will be 40 fps. In regular high speed it is 20 fps and in low speed continuous it is 5 fps, so you can control the frame rate that way.

Q: 7. Does the R6ii have a digital teleconverter?

A: Canon EOS R6 Mark II Mirrorless Camera BH #CAER62 have a "digital teleconverter" in that you can choose a 1.6 crop mode (1.6x digital teleconverter).

Q: 8. Is there an on/off switch for power?

A: This product does not have an on/off switch for power.

Q: 9. Is there an XLR input bar for recording sound directly that would work with this camera, as there is on the newer Sony?

A: There is no comparable Canon XLR input bar for the R6 II.

Q: 10. How long does the NPF Version last?

A: The Tilta NP-F970 Side Focus Handle with a Sony NP-F970 battery will last almost twice as much as the Tilta NP-570 Side Focus Handle with a Sony NP-F570 battery.