The Middle-Atlantic J-24X6 24" Jumper for Modular Power Raceway (6-Pack) lets you Modular Power Raceway (MPR) connect power modules, providing AC power to all modules on the same circuit.

Connect power MPR modules, providing AC power to all modules on the same circuit.

This pre-terminated jumper features convenient genderless 30A connectors at both ends.

UL US listed.

Sold in packs of six.

Related Questions and Answers

Q: 1. Can I trigger another camera (Canon 1D/Nikon D5) using 2 triggers? I want to shoot one camera and trigger another same time. If so, I see the provided cables are not for camera but rather for flash unit.

A: To trigger a Nikon D5 and a Canon 1D, you will need a total of three PocketWizards. You will need the kit with two, or the PocketWizard PlusX 2 Pack, and one extra one, B&H # POPWPX (https://bhpho.to/4gdBWFa), and these two cables: B&H # PON10ACC1K (https://bhpho.to/3Xynwbu) and B&H # POCMN3ACC1K (https://bhpho.to/4cRVEn2).

Q: 2. What camera is best for this film?

A: Any 35mm film camera. I use it in small and large cameras. It is especially good with cameras that only have a 125 appendure

Q: 3. can this be film be made to a CD instead of prints?

A: The best way I have found to do this is with a negative/slide scanner. I use one I purchased from Amazon and it is made by Wolverine who make really great products. the model# is F2D14 , it's a14 MP and it converts both 35mm Slides and Negatives to Digital Images. You will need a computer, once digitized you can make a CD, DVD, or even email them.

Q: 4. What is the accessory seen in the 4th picture of the product? Looks like a macro rail adapter but I could not find any information about it.

A: That is a part that RRS does not make any more.And you can use many other rails with that as it is Arca-Swiss style connection.

Q: 5. I have a Nikon D7000, and a Nikon Sb-910 speedlight. What exactly do I need to trigger my flash if it will be mounted on a softbox. Do I need to buy one or two, and do I need some other cables not included on the pocketwizard's box?

A: You would need two Plus X Transceivers: one for the Camera and one for the Flash. The Plus X would come with the cable needed to connect it to the SB-910.

Q: 6. Can I trigger two cameras at the same time? One PlusX on the hotshoe then the other one using a cable to trigger another? (Ex. shoot a Sony A7ii then trigger an A6500 at the same time?)

A: You can normally trigger from one camera to another.. It is always best to set the remote camera to full manual-focus and exposure-for best results. And you will need the appropriate remote camera cable. However, the Sony S-VPR1-ACC cable is only fully compatible with the Plus III and MultiMAX. You may have limited compatibility with the PlusX but it is not officially supported.

Q: 7. Will this work with older Norman P2000D packs?

A: Most likely... You'll have to find the sync cord that look like an outlet plug without the ground post. see here-https://a href= http://www.bhphotovideo.com/bnh/controller/search?N=10105412&InitialSearch=yes&sts=pi target= _blank www.bhphotovideo.com/bnh/controller/search?N=10105412&InitialSearch=yes&sts=pi/a

Q: 8. So if the film is expired how bad will the pictures turn? :(

A: I process a LOT of old film, and David is very much correct concerning black and white film. In color film however, the viability depends on film speed (the faster the worse)and as he said, temperature. Heat is sensitized material's worst enemy. We can compensate for a lot of color shift in printing, but the latent image often fades, as well as the film itself becoming fogged, producing lousy pictures. Sometimes, we can salvage images by printing them as black and white, doing away with the color shift. For long storage, even after shooting the film, store it in airtight containers (like the film can it came in)and drop it in the freezer. A day at room temperature is enough to defrost 35mm film for use. Humidity control is also important. For more info, Google Kodak bulletin E-30

Q: 9. Will this work with the Alien B800 light?

A: Yes it will. The 2 pack also includes a miniphone to miniphone cable, which is the size you need for the AlienBees sync port.

Q: 10. Can this product be used to trigger a Quantum Flash (for Nikon) using a Sony Nex camera with multi interface shoe?

A: Yes but only if there is a PocketWizard unit connected to your Quantum flash as well.