Connect your hidden source devices to your Full HD display neatly with the black 50' C2G Performance Series HDMI Cable. Its CMG/FT4 rating means it can be safely run through your wall, and CEC support allows control signals to be sent back from your compatible display to other compatible connected equipment, including A/V receivers, Blu-ray Disc players, and more. Its gold-plated connectors help enhance connectivity while resisting corrosion, and the aluminum-Mylar and Mylar shielding help minimize electromagnetic and radio frequency interference.

Supports Full HD @ 60 Hz    Aluminum-Mylar & Mylar Shielding    Gold-Plated Connectors    CEC Support    CMG/FT4 Rating for In-Wall Use

• Supports resolutions up to Full HD (1920 x 1080) at 60 Hz, which means higher quality video for viewing your screen content

• In-wall (CMG/FT4) rated jacket, so you can safely run the cable inside of a wall and have a clutter-free, clean look

• Integrated finger grips on the connectors for easy insertion and removal

• Gripping connector shell for greater port retention

• Gold-plated connectors for increased electrical conductivity and enhanced durability

• Supports CEC extensions for control of consumer electronics devices through a single control point

Related Questions and Answers

Q: 1. Do you know if this card is compatible with Windows 8?

A: No, it is not compatible with Windows 8. It is compatible with Windows 7, Vista, XP, 2000, ME, 98SE.

Q: 2. Will this fit a canon 5d mk iii with extender 2 x lll and lens 100-400 ll generation

A: The short answer is yes. The long answer is: I own the 5d mkiii, the 100-400 ii (with Kirk tripod foot for this lens - highly recommended), and the canon 1. 4 x (not the 2x). In addition, I have the Vello battery grip installed as well as the ProMedia 4 L bracket, so my camera configuration is larger than what you're asking about. My configuration is a bit tight in the Think Tank holster, but it does fit. Your configuration shouldn't be as tight. I have several Think Tank products; they are all of high quality. Hope this helps. GLA

Q: 3. Where does the weight of the camera/lens sit? For a smaller lens setup, is the entire weight of the camera carried by the grip or is there an adjustable shelf system on the lens end allowing the weight to be carried by both the grip and the end of the lens?

A: Yes there is an additional velcro pad that the lens can sit on. I have a grip on my D800 and it fits nicely in this bag.

Q: 4. Will the Fujifilm 150-600mm lens with Fujifilm XT3 fit in this bag?

A: The Think Tank Photo Digital Holster 50 V2.0 will fit the Fuji XT3 camera and 150-600mm lens.

Q: 5. Will this fit a Canon R5 with 100-400mm lens?

A: Yes, the Think Tank Photo Digital Holster 50 V2.0 (Black) will fit the Canon R5 with out a grip with the Canon RF 100-400mm f/5.6-8 IS USM Lens attached.

Q: 6. Does it fit the Canon 80D attached the Sigma Contemporary 150-600mm no battery grip but with tripod collar intalled ? thanks.

A: I don't have an 80D but do use the Digital Holster to hold to the Tamron 150-600 attached to a Canon 7DII with the collar attached. It's a very tight fit but it does work, provided I take off the lens hood first. The extended bottom make it long enough to hold the lens and the body but the extension at the bottom of the holster is too narrow to house the hood mounted on the lens.

Q: 7. Will a Nikon Z8 with battery grip and RRS L Bracket fit with a Z100-400 mm lens attached?

A: Yes, the Think Tank Photo Digital Holster 50 V2.0 (Black) fits the Nikon Z8 with battery grip and RRS L bracket with the Nikon Z 100-400 attached.

Q: 8. Will this read an old SmartMedia SM card?

A: Unfortunately, the Vivitar 50-in-1 Memory Card Reader / Writer cannot read SmartMedia cards.

Q: 9. Will this holster bag accommodate a Nikon D3s with Nikon 300mm f/4 AF ED (Screwdriver AF lens)?

A: I use Canon so I can't say whether your Nikon body and lens will fit or not, but measuring the interior demensions of the bag with the nose extension zipped it is 12 inches deep. Unzip the nose and the bag extends to 15 inches deep. The extension bellows is a slightly padded Cordura nylon fabric. The top opening is a good 7 by 7 1/2 inches. The quality of the materials is first rate and the manufacturing workmanship of the bag is absolutely flawless. The shoulder strap is just adequate. Tamrac curved padded shoulder straps are much better. Over all, I would strongly recommend this bag if its size fits your needs.

Q: 10. Can this be attached to a webbed belt?

A: It is designed to be used solo with the included strap or it can be attached to a Think Tank Belt or any similar type of thick sturdy belt.....however I recomend attaching the Pixel Harness to the belt for support. If used on a belt without a Pixel harness, you may find the holster...and your pants...down around your ankles !