Two and a half inches, 1200 lumens: the Olight Baton 3 Premium Edition LED Flashlight, offered here in a limited edition embossed spring graphic, is a remarkably bright light that could hardly be easier to carry. It's also easy to charge, thanks to the pocket-sized wireless charging case, which features a 3500mAh battery that can charge the light 3.7 times. Use the low-profile side-mounted push button switch to cycle through five output levels, from a power-stingy 0.5 lumens to the maximum setting of 1200, plus a strobe mode. A 3-color power indicator will warn you when the battery is running low; recharge the charging case using the included USB Type-C cable. The Baton 3 is IPX8-rated water resistant and impact resistant to 5', and its housing features a textured surface for a secure and comfortable grip.

Wireless Charging Case    1200 Lumens Peak Output    Strobe Mode    Cree XM-L2 CW LED    Low-Profile Side Switch    Battery Power Indicator    Lockout Prevents Accidental Activation    IPX8 Rated

• Ultra-low (Moon): 0.5 lumens
• Low: 12 lumens
• Med: 60 lumens
• High: 300 lumens
• Turbo: 1200 lumens (drops to 300 lumens after 1.8 minutes)
• Emergency strobe mode

• Type: Side switch push button
• Press and hold to cycle through brightness levels
• Three-color power indicator

• IMR 16340 rechargeable battery, 550mAh
• Pocket-sized charging case with 3500mAh battery, can charge light 3.7 times
• IPX8-rated water resistant
• Impact resistant to 5'

Related Questions and Answers

Q: 1. Are you able to tap AF on the smallhd monitor?

A: No, this will not work.

Q: 2. Can this L-Bracket fit my Nikon Z6II with FTZ adapter?

A: Yes, it supports the FTZ adapter.

Q: 3. I use the Peak Design Capture Clip. I bought the Ellie PD that has the PD plate built into it, but the overall design does interfere with the remote plug, as well as the left lens strap clip (forced upwards). So I'm thinking of trading for the Zelda, but it does not have the PD plate built to it. Can I safely and securely attach my own PD plate to the Zelda? Thanks.

A: If you are referring to connecting a Peak Design quick release plate onto the bottom of the 3 Legged Thing Zelda Dedicated L-Bracket, then as the unit does have a 1/4"-20 female threaded socket on the base of the L-bracket, you would be able to connect a quick release plate to this bracket.

Q: 4. Hi! will it fit the new Nikon z8?

A: No, 3 Legged Thing Zelda Dedicated L-Bracket for Nikon Z 5, Z 6, Z 6 II, Z 7 & Z 7 II Cameras is not compatible with the New Nikon Z8 mirrorless camera. 3 Legged Thing may develop a dedicated L-bracket in the following month after the Z8 release. In the mean time I would recomend a universal L bracket.

Q: 5. I have manfrotto tripod. is this work with Z6 camera and Manfrotto tripod?

A: Hi Philip, Our Zelda Brackets are a 38 mm / 1.5 " Standard Arca-Swiss. If the Manfrotto tripod is the same Arca-Swiss, then yes it should work.

Q: 6. does the Zelda 3 legged thing work on a Kirk ball head mount?

A: Yes. Both are arca-swiss compatible.

Q: 7. I use the Cotton Carrie strap and holster. Can you mount the hub somewhere on the bracket?

A: You can mount the Cotton Carrier Hub to the bottom of the 3 Legged Thing Zelda L-bracket. However, it would need to be removed upon placing the camera with the bracket attached to an Arca-type head.

Q: 8. Is this L-bracket compatible with the ZF?

A: No, the 3 Legged Thing Zelda Dedicated L-Bracket for Nikon Z 5, Z 6, Z 6 II, Z 7 & Z 7 II Cameras (Copper) is not compatible with the ZF.

Q: 9. How does it fit on the Z6 ii? Are there any issues as the z6 ii is slightly different from the z6.

A: It does fit on the Z6II without any issues. The cameras are identical enough that they didn't need to change anything especially because the biggest physical difference is the bigger grip. Which this bracket doesn't go over.

Q: 10. Do you have to remove it to install the Z7 adapter? I'm trying to find something that would be able to stay on permanetly when I change lenses that require the adapter to be used.

A: Hi--you do not have to remove this bracket to install the Z7 lens adapter.