Two and a half inches, 1200 lumens: the Olight Baton 3 Premium Edition LED Flashlight, offered here in a limited edition embossed summer graphic, is a remarkably bright light that could hardly be easier to carry. It's also easy to charge, thanks to the pocket-sized wireless charging case, which features a 3500mAh battery that can charge the light 3.7 times. Use the low-profile side-mounted push button switch to cycle through five output levels, from a power-stingy 0.5 lumens to the maximum setting of 1200, plus a strobe mode. A 3-color power indicator will warn you when the battery is running low; recharge the charging case using the included USB Type-C cable. The Baton 3 is IPX8-rated water resistant and impact resistant to 5', and its housing features a textured surface for a secure and comfortable grip.

Wireless Charging Case    1200 Lumens Peak Output    Strobe Mode    Cree XM-L2 CW LED    Low-Profile Side Switch    Battery Power Indicator    Lockout Prevents Accidental Activation    IPX8 Rated

• Ultra-low (Moon): 0.5 lumens
• Low: 12 lumens
• Med: 60 lumens
• High: 300 lumens
• Turbo: 1200 lumens (drops to 300 lumens after 1.8 minutes)
• Emergency strobe mode

• Type: Side switch push button
• Press and hold to cycle through brightness levels
• Three-color power indicator

• IMR 16340 rechargeable battery, 550mAh
• Pocket-sized charging case with 3500mAh battery, can charge light 3.7 times
• IPX8-rated water resistant
• Impact resistant to 5'

Related Questions and Answers

Q: 1. Can you attach this to the Peak Design tripod head?

A: The Zelda L-bracket will work with the Peak Design tripod (as will every other arca-style plate), but you will need to remove the two safety stop screws from the head of the tripod in order for it to slide/fit in.

Q: 2. Are you able to tap AF on the smallhd monitor?

A: No, this will not work.

Q: 3. I use the Cotton Carrie strap and holster. Can you mount the hub somewhere on the bracket?

A: You can mount the Cotton Carrier Hub to the bottom of the 3 Legged Thing Zelda L-bracket. However, it would need to be removed upon placing the camera with the bracket attached to an Arca-type head.

Q: 4. How does it fit on the Z6 ii? Are there any issues as the z6 ii is slightly different from the z6.

A: It does fit on the Z6II without any issues. The cameras are identical enough that they didn't need to change anything especially because the biggest physical difference is the bigger grip. Which this bracket doesn't go over.

Q: 5. Will this be compatible with the new Z6ii?

A: Yes.

Q: 6. Where are 3 Legged Thing products manufactured?

A: All our products are designed and engineered in the U.K., production happens in China, all other services and customer support are also based in the U.K.

Q: 7. I use the Peak Design Capture Clip. I bought the Ellie PD that has the PD plate built into it, but the overall design does interfere with the remote plug, as well as the left lens strap clip (forced upwards). So I'm thinking of trading for the Zelda, but it does not have the PD plate built to it. Can I safely and securely attach my own PD plate to the Zelda? Thanks.

A: If you are referring to connecting a Peak Design quick release plate onto the bottom of the 3 Legged Thing Zelda Dedicated L-Bracket, then as the unit does have a 1/4"-20 female threaded socket on the base of the L-bracket, you would be able to connect a quick release plate to this bracket.

Q: 8. Can this L-Bracket fit my Nikon Z6II with FTZ adapter?

A: Yes, it supports the FTZ adapter.

Q: 9. would I be able to add the Peak Design PL-S-3 Standard Plate to the bottom this l-bracket?

A: Yes, the bottom of the 3 Legged Thing Roxie-B L-Bracket for Canon EOS R5 and R6 does have a 1/4" screw opening like a camera has, so you can screw a plate there.

Q: 10. Is this L-bracket compatible with the ZF?

A: No, the 3 Legged Thing Zelda Dedicated L-Bracket for Nikon Z 5, Z 6, Z 6 II, Z 7 & Z 7 II Cameras (Copper) is not compatible with the ZF.