The UltimatePower Mini 20W USB Type-C PD Wall Charger from EZQuest is a portable, palm-sized device that can quickly recharge your mobile devices wherever there's an available outlet. All you have to do is supply the cable. When you connect your smartphone, tablet, or other compatible device, built-in circuitry recognizes its energy requirements and delivers the maximum amount of power possible for fast and efficient charging.

Up to 20W of Charging Power    1 x USB Type-C PD Port    2-Prong Type A Plug    Built-In Heat Sink & EMI Shielding    Integrated Device Protection    Compact & Palm-Sized Design

The UltimatePower Mini utilizes a built-in heat sink and EMI shielding to both dissipate heat quickly and maximize charging power. Connected devices stay safe thanks to integrated short-circuit, over-voltage, over-temperature, and over-current protection.

Related Questions and Answers

Q: 1. When using it on a godox vl150 light at 100% dim the battery display blinks "op". just wondering what it means (over power?)

A: The OP indication on the Smallrig VB batteries refers to the discharge power of the battery when it exceeds the rated power, the rated power of VB50 is 50W, the rated power of VB99 is 99W, and the rated power of VB155 is 155W.

Q: 2. Can the SmallRig NP-W235 Dummy Battery be safely used with the 8V out of the SmallRig VB99 Mini V-Mount Battery? I'm intending to use with a Fujifilm X-T5.

A: No, We would recommend using a regulated 7.2v 2A solution. You could damage the camera with the smallrig adapter. We recommend - GyroVu D-Tap to FUJIFILM NP-W235 Intelligent Dummy Battery (30") BH #GYGVDTAPW235 • MFR #GV-DTAP-W235 https://bhpho.to/3GRqf7n

Q: 3. can I power up Sony A1 with a battery plate and dummy?

A: You can. If you have a NP-FZ100 dummy battery that connects to a battery plate that uses L series batteries ( Like SmallrIgs) then yes this would work and keep your A1 powered.

Q: 4. How long in hours does this take to fully charge from 0% to 100% charge using a PD 60 Watt Charger? and a usb c

A: The ZILR 74.37Wh L-Series/NP-F970 Lithium-Ion Battery with USB Type-C PD Output B&H # BH #ZIZRNPB01 will take 4hrs to charge.

Q: 5. How many watts does the USB-C port output?

A: The SmallRig VB99 Mini V-Mount Battery (99Wh) provides a maximum of 65 watts out of the USB-C with the following on the USB-C output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A.

Q: 6. Can this battery be charged via usbc?

A: The IDX System Technology SB-U50 PD Sony BP-U Lithium-Ion Battery (14.4V, 48Wh) (B&H# ID144LIBUM48) may be charged through its USB C port.

Q: 7. I’m looking to power R5 (or R6mii) and Ninja V Recording touchscreen monitor - will this work? And what additional accessories?

A: Because the power output of the USB-C on the ZILR 74.37Wh NP-F970 Power Kit for Z CAM/Atomos/L-Series does not use the USB-C PD protocol, you cannot power the EOS R5 or EOS R6MKII with this setup with USB-C.

Q: 8. Can you use this with any blackmagic pocket camera without a dummy battery?

A: Yes, you have the option to use a D-tap to 2-pin cable.

Q: 9. Can you use the battery while it's plugged into the wall? as if it were a powersupply?

A: No, the USB port on the ZILR 74.37Wh L-Series/NP-F970 Lithium-Ion battery will provide 5V/3A to 20V/0.9A of power to external devices.

Q: 10. Will the ZILR NP-F970 Battery be able to power a Monitor along with powering the Sony RX10M4 DSLR camera?

A: Yes, with a USB-C to Micro-USB cable, like the StarTech USB Type-C Male to Micro-USB Male Cable (3.3') (B&H # STUSB2CUB1M), you can power a Monitor and the Sony RX10 IV with the ZILR NP-F970 Battery with USB Type-C PD (30W).