Transmit lossless HD video up to 750' with the Ranger MK II 750 12G-SDI/HDMI Wireless Transmitter from Teradek. Redesigned for broadcast, event, drone, and handheld applications, this transmitter can input up to 4K60 video over HDMI or 12G-SDI with 10-bit HDR support and transmit up to 4K60 video over a wide 4.9 to 6.4 GHz wireless range, including licensed and unlicensed bands in the 6 GHz U-NII 5 spectrum. The transmitter unit provides a powerful signal that can travel up to 750' line of sight. It also features an SDI loop output for local monitoring, and one horizontal and one vertical N-type antenna.

The transmitter supports transmission of up to 4K60 video to up to six receivers and features built-in AES-256 encryption protects your video from prying eyes. It can transmit visually lossless video to any Ranger series receiver with zero delay. The transmitter supports a desktop Launchpad software application or the Launchpad app for iOS or Android that easily connects via Bluetooth 5, which both provide a spectrum analyzer, channel selection tools, and remote configuration.

The unit is powered using a 2-pin DC input or the included V-mount battery plate, and there are 1/4"-20 and M3 mounting threads to mount your transmitter on a variety of cameras, cages, or rigs.

Supports 4.9 to 6.4 GHz Frequency Bands    Transmit Video up to 750' Line of Sight    Lossless Transmission with Zero Delay    4K60 10-Bit 4:2:2 HDR Support    V-Mount Battery Plate    12G-SDI and HDMI Input, SDI Output    Transmit to up to 6 x RXs    Pairs with all Ranger Series Devices    AES-256 Encryption, 2 x Antennas    Launchpad App, Spectrum Analyzer

State-of-the-art hardware. Designed for professional video production. The Ranger Series is powered by Teradek's Emmy and Academy Award-winning technology for zero-delay wireless video transmission. This model boasts a maximum range of 750', and it works seamlessly within a variety of professional broadcast, sports, and ENG applications, including handheld gimbals, drones, and shoulder-mounted production cameras.

Pair any combination of Ranger TX and RX together, regardless of model. That means your production can quickly scale and operate a variety of Ranger systems best suited to your environment, despite differences in transmission range. Mixed Ranger systems operate with a range of the lowest paired model. 6 GHz operation requires support on both the TX and RX.

When a delay in audio and video transmission is noticeable, it's nearly impossible to offer a lifelike experience. Ranger's patented zero-delay technology solves this problem. With Ranger, your audio and video signals are transmitted with ultra-low latency, even in 4K60, providing a visually lossless and engaging experience for your viewers.

• Install the Launchpad app on your macOS or Windows computer, or on iOS/Android phone
• Bluetooth 5 LE connection support
• Pair transmitters and receivers with the touch of a button
• Measure and analyze the frequency and amplitude of a signal
• View live channel strength for licensed/unlicensed bands
• Monitor your live RF spectrum bandwidth

With the number of wireless devices on the rise, and a limited amount of frequency bands to choose from, there is little room for your signal to move without interference or disruption. But with Ranger, you have options: 5 GHz for general use, licensed band frequencies for special events, and the new 6 GHz U-NII-5 band for 12 new channels of uncongested wireless spectrum.

Related Questions and Answers

Q: 1. Do you know, this one probably use with speed light Canon 580 ?

A: You need to get this Set, one goes on the Camera, the other goes under your 580 flash, off camera. Yongnuo YN-622C II E-TTL Wireless Flash Transceiver for Canon (2-Pack) BH #YOYN622CII • MFR #YN-622C II

Q: 2. Is there another battery plate for Teradek Bolt that would be better suited to support the AG-VBR59 batteries?

A: no unfortunately those plates have been discontinued and can no longer be found

Q: 3. Can I used this flash without the Wireless Flash Trigger? TY.

A: Yes.

Q: 4. Will this work with Canon BP-955 batteries?

A: No, the following unit will work with Canon BP-970 batteries only.

Q: 5. Does it work with the Teradek Bolt 500?

A: helloI think yes, it's looks to be the same lemo connectori am using it with a bold 300, no problem

Q: 6. Hi, this work via RT with canon 600 Ex-Rt ?

A: Yes, it will work.

Q: 7. Does the Sony version have a full metal hot shoe?

A: The hahnel Modus 600RT MK II Speedlight for Sony Cameras does not currently come with a full metal hot shoe. This is something that will be implemented some time in the future, and DIY upgrade kits will be made available as well. There is no precise timeframe or pricing on when the change will be implemented.

Q: 8. Compatible with bolt 6 receivers?

A: Yes, this battery plate is compatible with the Teradek Bolt 6 Receiver.

Q: 9. Is the Hahnel 600RT 11 compatible with the Nikon Zfc?

A: Yes, the hahnel Modus 600RT MK II Speedlight Pro Kit for Nikon can work with Nikon mirrorless cameras such as the Nikon Zfc.

Q: 10. Would this work with a canon 430ex rtiii speedlite?

A: Yes this transmitter is compatible with the Canon 430EX III RT.