The brown Series9 Omni Dual-Element Earmount Microphone from Point Source Audio is designed to deliver clear speech and vocals in a miniature form factor with flexible mounting options. Two EMBRACE earmounts can be trimmed to fit your talent and mounted to the right- or left-side of your talent, while cable clips keep the wiring concealed. Ideal for both live stage events and small studio setups, the microphone features an omnidirectional pickup pattern with dual element condensers with IP57 rating resistant to water, sweat, and makeup.

This Series9 microphone features a 20 Hz to 20 kHz frequency response and 142 dB SPL. Two locking 3.5mm connectors are hardwired for Sennheiser Evolution series transmitters and other compatible devices. The 5.6' integrated cable bends 360° and allows for direct integration with compatible bodypack transmitters. A foam windscreen and storage box are also included.

For Broadcast, Film/Video & Presentation    Dual-Element Omnidirectional Pickup    For Sennheiser Transmitters with 3.5mm    Headroom for Strong Vocals / 142 dB SPL    Easy to Conceal, EMBRACE Earmounts    Rugged 5.6' Cable Stays Pliable    IP57 Rated    Requires 1 to 10 VDC    Includes Windscreen and Clips

• Sennheiser: hardwired to work with Sennheiser bodypack transmitters and recorders equipped with a locking 3.5mm connector, including the Evolution (ew) series
• Also works with many third-party wireless transmitters and portable audio recorders that are equipped to supply 1 to 10 VDC through a locking 3.5mm connector wired for Sennheiser compatibility

Related Questions and Answers

Q: 1. Can it fit Canon RF 24-105 F4-7.1 IS STM?

A: Yes, the EW73D hood is compatible with the RF 24-105mm f/4-7.1.

Q: 2. Can I daisy chain this off of my CalDigit Ts3's spare TB3 port? Or does it need to be connected to the host?

A: You can use the CalDigit Thunderbolt 4 Element Hub daisy chained to a CalDigit TS3, but total bandwidth will be limited by the connection between the TS3 and the host computer.

Q: 3. Does the CalDigit work with Windows 10/11 with devices that are USB C 3.1 compliant?

A: The CalDigit Thunderbolt 4 Element Hub (BH #CA500934), is compatible with Windows 10 or 11 computer that has a USB-C 3.1 connection.

Q: 4. anyone using this on a PC laptop? If yes, does it perform well? Windows 10?

A: The CalDigit Thunderbolt 4 Element Hub would be suitable for a Windows laptop.

Q: 5. Can this hood work with Canon ef 17-40 mm f/4L sum len ?

A: No. The Canon EW-83E Lens Hood would be the correct hood for the Canon EF 17-40mm f/4L USM Lens. Here is the link for you: http://bhpho.to/TyXGkS

Q: 6. I bought this for the RF 24-105 4-7.1, and it's very snug to twist into place when installed forward (normal), but does not lock; when installed backward it slides lightly, perfectly, into place and locks. that's the opposite of my other locking hoods. any ideas?

A: Try rotating the Canon EW-73D Lens Hood when mounting it to the lens--it's a bayonet mount and the spacing may not be perfect, so one part of the bayonet may mount better than another.

Q: 7. Does this fit RF 24-105mm f/4-7.1 IS STM Lens?

A: That is not the lens hood for that lens; this is the correct lens hood: https://www.bhphotovideo.com/c/product/1225882-REG/canon_1277c001_ew_73d_lens_hood.html

Q: 8. With muliple drives connected, will they "sleep" properly when the comp sleeps? ppl complain the TS4 improperly disconnects them

A: Setting a computer to sleep while devices are connected via the CalDigit Thunderbolt 4 Element Hub will have the same effect as if those devices were connected directly to a USB port on the computer.

Q: 9. I plan to connect a Mac Book Pro and an external drive to the dock. When I remove the laptop from the dock, would I need to eject the external drive first?

A: Yes, you should always safely eject all external media before disconnection to prevent any involuntary data loss.

Q: 10. Is this EW73D fit with Canon EF-S 18-135mm 1:3.5-5.6 IS STM ?

A: No. You want the EW73B. Don't worry, if you ordered D, I did as well. B&H was excellent when assuring I got the right equipment. Very eay! But...you need the B.