Drop a filter in front of your GoPro HERO11 lens with this pink 52mm Filter Tray Adapter Ring from Tilta. This durable aluminum adapter requires the separately available Full Camera Cage for GoPro HERO11, and it installs onto the cage using two included captive screws. The adapter allows you to install a 52mm circular filter or step-up ring onto the front of your HERO11 lens.

Add 52mm Circular Filter to GoPro HERO11    Requires HERO11 Full Camera Cage    Compatible with Step-Up Rings    Mounts using 2 Captive Screws    Aluminum & Stainless Steel Construction    Comes in Pink Color

Related Questions and Answers

Q: 1. What is the largest size monitor you can use when attached to the power supply module on the top?

A: I wouldn't recommend any monitor that is larger than 7".

Q: 2. Does the ring come apart to pack down for travel? If it does, can it be done quickly & easily for frequent travel?

A: Yes, The Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals can be disassembled quickly, if you need to pack it for travel. Good info from the manual: https://bit.ly/408eJMg

Q: 3. My lens' focus ring diameter is 61.75mm. Should I get the 59-61mm or 62.5-64.5mm ring?

A: we recommend going with the smaller size.

Q: 4. What focus motors does the focus handle pair with?

A: According to Tilta, the RS 2 Remote control handle will be able to control a DJI Follow Focus Motor or a Tilta Nucleus Nano or Nucleus M Motor, while the Dual Channel Wireless Lens Control Handle will only work with Tilta motors, such as the Nucleus Nano or Nucleus M Motors.

Q: 5. What is the weight capacity of each ring adapter clamp? Also, what is the gimbal ring diameter thickness supported by the clamps?

A: While Tilta does not list a weight capacity for the Tilta Armor Man 3.0 Overhead Configuration Gimbal Ring Adapter Clamps (Set of 2), the clamps should be able to hold at least 22-26 lbs, as is suitable for the Tilta Armor Man 3.0 kit. It can hold 30mm and 25mm rods.

Q: 6. How can we integrate the DJI Focus Pro grip with this ring?

A: The DJI Focus Pro grip can be integrated into both the Tilta Advanced and Basic Ring Grip for DJI RS 3 Pro and RS 2 Gimbals by utilizing the NATO rails on either side of the gimbal.

Q: 7. When using the Gold Mount Power Plate, will a Titon Micro 150 battery allow enough clearance for the gimbal to fully pan left and right?

A: You can use the Titon Micro 150 battery when the battery plate is mounted on top of the grip. That way there's full clearance for the gimabal to pan fully.

Q: 8. Is this ring compatible with the Voigtlander Nokton 23mm f/1.2 Aspherical Lens for FUJIFILM X with 46mm filter diameter?

A: No, the Tilta Seamless Focus Gear Ring (46.5 to 48.5mm) will not fit around the Voigtlander Nokton 23mm f/1.2 Aspherical Lens for FUJIFILM X, as the lens does have a 46 mm front filter thread but the diameter of the lens is actually 59.3mm. You should get the Tilta Seamless Focus Gear Ring (59 to 61mm), BH #TITAFGR5961, instead.

Q: 9. Exactly which Nitecore batteries should be used in handles? 18650 2600mAh or 3200mAh?

A: We highly suggest the following for the Tilta Advanced Ring Grip for DJI. Nitecore 18650 Li-Ion Rechargeable Battery (3.6V, 3500mAh) BH #NINL1835 • MFR #NL1835 https://bhpho.to/40lscAd

Q: 10. Does this come with the Tilta Soft-Shell Case for Advanced Ring Grip?

A: No, the Tilta Advanced Ring Grip does not include a case.