This is a single Replacement Antenna, from Teradek, suitable for the Beam transmitter or receiver.

Single Antenna for Beam Transmitter or Receiver

Related Questions and Answers

Q: 1. Can I use this with the Bolt 6 LT ? If so, does the range of the receiver (either 750 or 1500) impact the range of the array?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) can be used with the Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit. The product provides a robust and uninterrupted directional signal, but the range will still be limited to that of the bolt set.

Q: 2. Would these add to stability and range if used with Bolt 6 LT HDMI 750?

A: The Teradek 6G Flexible "Mushroom" H Antenna Kit for Bolt 6 (4-Pack) will not increase range, but can increase reliability and connection on the Teradek Bolt 6 LT HDMI 750 when 2 of the antennas are used on the TX and 2 are used on the RX.

Q: 3. Is this antenna compatible with a Serv Pro? If not, can someone point me to the correct antenna? Teradek does not list a replacement antenna for the Serv Pro. Thanks!

A: BH #TECUBIT020Q is the replacement antenna we recommend for the Serv Pro. You will want this instead. https://bhpho.to/2Jwe1Gf

Q: 4. Will these replacements work with the Bolt LT transmitters?

A: Yes, the Teradek Replacement Dual-Band Wireless Antennas (2-Pack) will work with the Teradek Bolt LT.

Q: 5. Is it compatible with Teradek Serv Pro or not?

A: Yes, The following 3dbi antennas will work.

Q: 6. Does it fit with teradek bolt 600 tx/rx?

A: Yes, this will work.

Q: 7. So two different answers on the compatibility with the bolt XT. Can somebody confirm if this can work on it or not? One of the answers left a link to a discontinued item

A: This is compatible with the Bolt 500 XT. According to Teradek part number 11-0022 is the correct antenna.

Q: 8. is this a male or female connector?

A: This is a female connector.

Q: 9. Can you combine IEM and IFB RF signals of different output strengths? For instance I have a Lectrosonics M2T that has two output carriers of 50mw each. and a Lectrosonics T4 IFB transmitter that outputs 250mw. Can I combine them all with this to a single antenna?

A: It is possible to use transmitters with different power output levels with the RF Venue COMBINE4 - 4-Channel Antenna Combiner. This combiner is a unity device that does not affect or change the output strength of the transmitters connected. It does, however, have a maximum input level of 100mW and would not be compatible for use with a transmitter pushing 250mW such as the Lectrosonics IFBT4.

Q: 10. this works with teradeck 750?

A: Yes, this will work with the Teradek 750.