Add an ultra-bright monitor to your production rig with the SmallHD ULTRA 5 Bright Touchscreen Monitor, which features a 3000 bright cd/m² display for viewing in just about any indoor or outdoor environment. The 5" 1920 x 1080 touchscreen LCD provides a sharp image and 10-bit 4:2:2 Rec. 709 color processing, ideal for focus pulling and image analysis on set and in the field.

The ULTRA 5 features HDMI and 3G-SDI inputs and outputs, and it also features physical buttons for use in conditions that might require gloves. It can also be used to control your camera, features a 5-pin USB port for optional RED camera control, and has an Ethernet port for optional ARRI and Sony VENICE camera control. All the functionality of the monitor is available via PageOS 5, which provides advanced functionality with a simple and efficient graphical user interface.

ULTRA 5 Bright Touchscreen Monitor    Ethernet Camera Control Cable    Software License    Control Sony VENICE via Monitor

Daylight-viewable, 5" touchscreen on-camera monitor with 3000 cd/m² brightness

Slim, lightweight design with 10-bit 4:2:2 DCI-P3 color, touchscreen LCD panel

HDMI and 3G-SDI inputs and outputs

Buttons around the monitor allow you to use the monitor in any conditions

The PageOS 5 toolset with EL Zone Exposure Assist, best-in-class waveform, false color, Look-Around Camera Control (sold separately), advanced Teradek RT overlays, and more

Four 1/4"-20 mounting threads on the left, right, bottom, and back of the monitor

Power using a 2-pin power input

Optional RED camera control via the micro-USB port

Optional ARRI/Sony VENICE camera control via the Ethernet port

Durable aluminum chassis

Related Questions and Answers

Q: 1. Does this monitor receive signal from TERADEK ACE 800?

A: At this time the SmallHD Cine 7 500 RX will work with only Bolt 500 transmitters.

Q: 2. Can you control an ARRI Alexa EV with this monitor?

A: No this will not control an ALexa EV with this, for ARRI Alexa control you need the SmallHD Cine 7 Touchscreen Monitor Deluxe Camera Control Kit (V-Mount)

Q: 3. What cable do you recommend to buy to give power? some D-tap? what connector do I have I don't know

A: This monitor has a 2 Pin Lemo Input for power. You can use the Teradek 2-Pin LEMO to P-Tap Cable (18") to power it from a source with a D-Tap port, BH #TEBIT118. https://bhpho.to/36ogt7N

Q: 4. Does this kit include RED Komodo control and the required cables?

A: No it does not include the control for the RED Komodo. The link below is the kit you would need instead: https://www.bhphotovideo.com/c/product/1616857-REG/smallhd_mon_cine_7_komodo_cine_7_red_komodo.html?sts=pi&pim=Y

Q: 5. How is the RED DSMC2 control interface?

A: The SmallHD interface for control of RED cameras is very similar to the RED controls. Here is a good overview. Video - https://bit.ly/3UULNEY

Q: 6. Is the D tap power cable included?

A: the monitor includes SmallHD 2-Pin LEMO to D-Tap Power Cable (36")

Q: 7. Does the Cine 7 monitor accept 24v power through the Lemo connector?

A: Yes. The monitor has a maximum input of 34vdc and sending 24v through Lemo would be a standard practice.

Q: 8. Can you turn the TX/RX off when you don't need it to lower power draw?

A: yes the transmitter can be disabled when not in use and it will reduce the power draw

Q: 9. Is bolt 1000 receiver compatible with Cine 7 500 TX?

A: Yes, the Cine 7 500 TX can be paired with the Bolt 1000.

Q: 10. What's the difference between Cine version and Indie version?

A: The Cine 7 is a significantly brighter display at 1800 nits of brightness vs the Indie 7 at 1000 nits of brightness. The Cine 7 has a larger color space (covers 100% of DCI-P3) vs Indie 7 (100% of Rec 709) Both monitors are excellent choices for the Red Komodo and share the but the Cine 7 is a brighter and more accurate monitor than the Indie 7.