The beige Series9 Omni Dual-Element Headset Microphone from Point Source Audio is designed to deliver clear speech and vocals in a miniature form factor with flexible mounting options. Dual earhooks can be freely adjusted to suit your talent, while a cable clip keeps the wiring concealed. Ideal for both live stage events and small studio setups, the microphone features an omnidirectional pickup pattern with dual element condensers with IP57 rating resistant to water, sweat, and makeup.

This Series9 microphone features a 20 Hz to 20 kHz frequency response and 142 dB SPL. A locking 3.5mm connector is hardwired for Sennheiser Evolution series transmitters and other compatible devices. The 5.6' integrated cable bends 360° and allows for direct integration with compatible bodypack transmitters. A foam windscreen and storage box are also included.

For Broadcast, Film/Video & Presentation    Dual-Element Omnidirectional Pickup    For Sennheiser Transmitters with 3.5mm    Headroom for Strong Vocals / 142 dB SPL    Dual Earhook Headset    Rugged 5.6' Cable Stays Pliable    IP57 Rated    Requires 1 to 10 VDC    Includes Windscreen and Clip

• Sennheiser: hardwired to work with Sennheiser bodypack transmitters and recorders equipped with a locking 3.5mm connector, including the Evolution (ew) series
• Also works with many third-party wireless transmitters and portable audio recorders that are equipped to supply 1 to 10 VDC through a locking 3.5mm connector wired for Sennheiser compatibility

Related Questions and Answers

Q: 1. I bought this for the RF 24-105 4-7.1, and it's very snug to twist into place when installed forward (normal), but does not lock; when installed backward it slides lightly, perfectly, into place and locks. that's the opposite of my other locking hoods. any ideas?

A: Try rotating the Canon EW-73D Lens Hood when mounting it to the lens--it's a bayonet mount and the spacing may not be perfect, so one part of the bayonet may mount better than another.

Q: 2. This hood is reversible? (can be attached looking into the camera for easy storage)

A: Hi Hector! Yes the hood will fit reversed on the Canon RF 24-105mm f/4.

Q: 3. Does it comes with power supply?

A: Yes, the CalDigit Thunderbolt 4 Element Hub includes a 150W power supply.

Q: 4. If you have 4 USB3 devices plugged in, what is the capable bandwidth per port?

A: The CalDigit Thunderbolt 4 Element Hub's host connection is Thunderbolt 4, which has a maximum bandwidth of 40 Gbps. As such, four connected USB 3.0 devices running at a theoretical maximum bandwidth of 4.8 Gbps should be no problem.

Q: 5. Can it fit Canon RF 24-105 F4-7.1 IS STM?

A: Yes, the EW73D hood is compatible with the RF 24-105mm f/4-7.1.

Q: 6. Does this fit Canon 16 35 F4 ?

A: I bought a lens hood for my Canon 10-22mm f/4 with ring diameter at 77mm. If your ring is also 77mm, that will fit.

Q: 7. Will this dock support two 1440p gaming monitors with one of them at 144hz and the other at 170hz?

A: The CalDigit Thunderbolt 4 Element Hub will support two 1440p displays at 144 Hz and 175 Hz.

Q: 8. Can I daisy chain this off of my CalDigit Ts3's spare TB3 port? Or does it need to be connected to the host?

A: You can use the CalDigit Thunderbolt 4 Element Hub daisy chained to a CalDigit TS3, but total bandwidth will be limited by the connection between the TS3 and the host computer.

Q: 9. Is this EW73D fit with Canon EF-S 18-135mm 1:3.5-5.6 IS STM ?

A: No. You want the EW73B. Don't worry, if you ordered D, I did as well. B&H was excellent when assuring I got the right equipment. Very eay! But...you need the B.

Q: 10. anyone using this on a PC laptop? If yes, does it perform well? Windows 10?

A: The CalDigit Thunderbolt 4 Element Hub would be suitable for a Windows laptop.