Capture license plates of moving vehicles day and night with the GV-LPC2211 2MP Outdoor Network LPR Bullet Camera from GEOVISION. This unit captures license plates of vehicles traveling at up to 75 mph. It features a 1/2.8" progressive scan CMOS sensor to capture 1080p resolution video at 30 fps. IR LEDs provide up to 65' of night vision across two lanes of traffic to clearly read license plates in low-light conditions. The camera's 9-22mm motorized varifocal lens delivers a 39 to 17° horizontal field of view. Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable. A 32GB microSD card is preinstalled to store captured footage.

Compliance with ONVIF profile S enables interoperability with a wide range or surveillance devices. The camera is housed in an IP67- and IK10-rated metal enclosure that is suitable for outdoor use in areas at risk of vandalism.

1920 x 1080 Resolution at 30 fps    Capture License Plates at up to 75 mph    IR LEDs for Night Vision up to 65'    9-22mm Motorized Varifocal Lens    39 to 17° Horizontal Field of View    RJ45 Ethernet with PoE Technology    Complies with ONVIF Profile S    IP67 Rated for Outdoor Use    IK10-Rated Vandal Resistance

Recognizes reflective license plates on vehicles traveling at up to 75 mph

Removable IR cut filter for day and night functionality

Dual streaming

2-axis angle adjustments

Image settings include: brightness, contrast, saturation, sharpness, gamma, auto exposure, white balance, flicker-less, image orientation, shutter speed, maximum video gain, D/N sensitivity, defog, denoise, and metering.

Access from web browser enables live viewing, video recording, video quality, bandwidth control, image snapshot, PiP, PaP, privacy mask, tampering alarm, text overlay, motion detection, IP address filtering, and digital PTZ.

Additional features include: temperature detector, white balance, wide dynamic range (up to 72 dB), and 56 dB S/N ratio.

Compatible with Internet Explorer, Chrome, Firefox, Edge, and Safari

Firmware upgrades via web browser or GV-IP device utility

CE, FCC, RCM, and RoHS certified

Related Questions and Answers

Q: 1. Do i need to buy the Godox XproCttl wireless Trigger to get full function. or will my yongnuo YN-622n-tx ittl work????

A: Buy the Godox trigger/transmitter if you plan to have full control of the AD600pro. I purchased the Godox XProS trigger for Nikon cameras because it functions similar to my Phottix receiver. You can quickly move between light settings using the XProS.

Q: 2. What is the warranty on the Good AD600Pro Wistro? And since, as far as I know, Godox does not have an official US service center, who provides warranty service if needed?

A: The Godox AD600Pro Witstro All-In-One Outdoor Flash includes a Limited 1-Year Warranty from Godox. All warranty related questions would need to be answered through Godox directly.

Q: 3. It's circular so I'm wondering if any of the Profoto modifyers with the rubber would fit around it. Has anybody tried this yet?

A: No, it will not fit.

Q: 4. How do you use this light with an umbrella? I do not see any brackets listed like there was with the 360, or AD600.

A: There is a spot just above the locking knob and just below the lcd display to insert the umbrella.

Q: 5. What kind of soft box can I add to it?

A: Yes, any Bowens mout will work. I purchased a Godox softbox from another retailer since B&H dind't stock the one I wanted...works great. Umbrellas will work too since there is a built-in umbrella mount.

Q: 6. Can this unit be triggered from the canon 600exII flash?

A: By putting the Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon B&H # GOX1TC on your camera, you can have a Canon 600 EX RT on top while firing this monolight wirelessly, both in TTL.

Q: 7. Will the AD400Pro fire with a Phottix Laso Trigger while also firing a Canon 600EX2-RT?

A: You would need a transmitter on your camera's hot shoe, such as either the Phottix Laso TTL Flash Trigger Transmitter for Canon, B&H # PH89092, the Canon ST-E3-RT Speedlite Transmitter, or a Canon Speedlite Flash with Canon's radio wireless transmitter built into the flash unit, to work as a transmitter on the camera. If one of these are on the camera's hot shoe working as a transmitter, then you may connect the Phottix Laso TTL Flash Trigger Receiver for Canon, B&H # PH89091, to the 1/8" (3.5mm) sync terminal on the Godox AD400Pro Witstro All-In-One Outdoor Flash using a sync cable (such as the Impact Sync Cord Male Mini to Male Mini (16"), B&H # IMMMMM16). This would allow you to trigger the Godox AD400Pro Witstro All-In-One Outdoor Flash and the Canon 600EX II-RT Speedlite Flash simultaneously with your setup.

Q: 8. Will Flashpoint Sony trigger control this unit?

A: The Flashpoint should work to control this unit yes. We however do not sell the Flashpoint brand to test it.

Q: 9. When do I update the firmware and how often does it need to be updated?

A: To download the most recent firmware update from Godox, you would visit their website and go to their Downloads webpage from their menu bar. The Downloads page is listed on the link included below. You would then search for the AD600 on the webpage, then click the green arrow in the Downloads column next to the AD600 on the webpage to begin your download. It only requires updating when a new update is released by Godox, or if you are having issues with your flash.a href= http://www.godox.com/EN/Download.html target= _blank http://www.godox.com/EN/Download.html/a

Q: 10. Can I use my Pocket Wizard transceivers with this?

A: You may connect a Pocket Wizard transceiver to this monolight with a sync cable. However, you will lose any sort of wireless control over the power output of the light. It would merely a trigger only.