The Vicoustic VicSpacer Suspension Kit makes it possible to suspend your VicSpacer from the ceiling, significantly increasing the absorption capacity. One kit contains 16 triangular sheets in galvanized steel and the corresponding steel cables with hook, allowing you to suspend 4 VicSpacers. Easy to install, this solution allows very interesting installations when different heights are combined. Maximum suspension height is 51" and the minimum suspension height is 11.8". The VicSpacer Suspension kit can be used with the VicSpacer and the VicSpacer Plus (it's not compatible with VicSpacer XXL).

Suspend up to 4 x VicSpacers

Related Questions and Answers

Q: 1. Will this work with a snowball

A: Yes. This MCrane1 arm uses a common 5/8" microphone threading. The Blue Snowball mic has a compatible female thread for it. For better isolation from vibrations in your desk, you could also consider the Blue Ringer shockmount (optional).

Q: 2. What is the difference between this and the HD version (B&H # RYPRSM)?

A: Couple of differences between the standard & HD versions. Firstly the Lyre on the HD are slightly stiffer, and therefore can support recorders of a heavier weight (over 300g or 0.66lbs). Also the adjustment on the tilt of the HD uses a knob, rather than just a screw on the standard - which gives a tad more grip needed for heavier recorders. Hope that helps.

Q: 3. Will the bottom of the handle mount onto a boom pole and/or a hot shoe adaptor?

A: The included handle features a 3/8' threading compatible with a boom pole. Using the included shoe adapter also mountable to a camera.

Q: 4. What are the dimensions? How much weight can it hold?

A: The only dimensions published are the arm length. Which is Arm Length 27.6" / 70.0 cm. The load capacity is 2.5lbs.

Q: 5. Can I Attach this directly to a tripod that has a 1/4"-20 male thread?

A: You would need BH #IMCA109 to be able to do that.

Q: 6. Does The Shockmount for the D50 fit on the D100?

A: Due to the additional weight of the PCM-D100, it needs a heavier duty shock mount. The correct model is 041130, here's a link: a href= http://www.bhphotovideo.com/c/product/1050990-REG/rycote_041130_portable_recorder_shockmount_hg.html target= _blank http://www.bhphotovideo.com/c/product/1050990-REG/rycote_041130_portable_recorder_shockmount_hg.html/aCheers, Simon

Q: 7. Will the dead cat for the H6 capsules?

A: Yes, it will work.

Q: 8. Hi there. What is the maximum payload this can handle?

A: Rycote does not list a maximum weight the Rycote 041130 mount can support, only a minimum weight of 300g.

Q: 9. What is designed mic weight range for this? (The manufacturer's video indicates that different designs serve different applications. Makes sens. So what weight mic can THIS one handle? One reviewer noted his recorder flopped around too much.)

A: For recorders with a weight 300g (.67 lbs) or higher Rycote recommends the Portable Recorder Suspension HD. https://bhpho.to/2lzKviy This will support larger recorders such as the Zoom H6, Marantz PMD661, Roland R26 and other similarly sized recorders.

Q: 10. Seems like the only suspension product available for the Sony D100. The 2 existing reviews of the 041130 are quite negative, so is there another product (rubber/silicone?) that would fit the 3/8 thread and further dampen bumps and shocks? The intent would be to put a Sony D100 atop a camera or use a flexible arm connected to the same tripod the camera uses. Obviously, you don't want noise from camera movement on the tripod to enter the D100. Thanks.

A: Hi JDW26: thanks for your question. Unfortunately, this is the only solution we currently provide for the D100; we do not recommend making any additional modifications to the mount. Sorry we can't help any more in this case.