Use this Wooden Camera D-Box Extension Bracket to properly attach your D-Box power strip to the back of your Sony VENICE Rialto 2. The bracket is specifically designed to accommodate the updated Rialto 2 form factor. Two 1/4"-20 screws secure the bracket in place.

For Sony VENICE Rialto 2    Extends D-Box Power Strip    Two 1/4"-20 Screws

Related Questions and Answers

Q: 1. Can this item power a Panasonic BGH1?

A: The Wooden Camera WC Pro V-Mount for Sony FS7/FS5 & Panasonic EVA1 (B&H# WO261000) is not designed for use with the DC port of the Panasonic Lumix BGH1 Box Cinema Camera (B&H# PADCBGH1) and we do not recommend it. Rather, use a Sony L-series battery directly in the camera's battery plate or a dummy battery connected to a V-mount battery plate (with a V-mount battery), if desired.

Q: 2. Can you stretch the vertical side of the plate away from the camera to allow easier access to the side door?

A: The camera screw on the bottom of the Kirk L-Bracket for Sony a7R V is in a longer groove that allows the whole bracket to be mounted more to the side for easier port access.

Q: 3. I have a holdfast money maker strap, will it be compatible? When I attach/connect the ring to it?

A: Sorry, no, you cannot attach a clip to the ring on this grip extension. I would recommend that you attach the strap clip to one of the camera strap lugs with this. EDDYCAM Protection Pads & Camera Rings B&H # EDPRPDTRX2

Q: 4. Will this IDX V mount battery plate work with the SmallRig Battery Back (1547) that has the capability to mount onto 15mm rods?

A: Yes, this should work well with the SmallRig 1547 Battery Back with 15mm LWS Bracket, BH #SM1547.

Q: 5. Will the IDX DUO C198 battery work with this plate?

A: Yes, this V-Mount battery will work on this plate. https://bhpho.to/2TOccr6

Q: 6. Is there any way to adapt the QD Socket to a normal threaded socket to be able to use my Blackrapid camera strap? I guess I mistakenly purchased this L Bracket from B&H thinking it would be like the previous Kirk L Bracket I have for my Sony a9 and this one for the Sony a7rv is not completely compatible.

A: No you can not change the QD socket on the Kirk L-Bracket for Sony a7R V to a thread. But you can use most black rapid straps with this and it will work on that bracket, https://bhpho.to/3BqJGRe .

Q: 7. Does this provide regulation for the power coming from the battery?

A: David, Yes, the the V-Mount Battery Plate will provide the necessary regulation for the camera. Thanks, Wooden Camera

Q: 8. Does it fit the A7M3?

A: Yes it works and if you use peak design there is a way to rig it to work with tripod plate. It does help out when using heavier lenses to have pinky grip. Its all metal, super light too.

Q: 9. Is this support ring + WC fx6 top plate able to be used with the Mofage Poco VND PL - E mount adapter?

A: The Wooden Camera Lens Support Adapter clamps to the Wooden Camera E-Mount to PL Mount Pro adapter for the Sony FX6 camera. The adapter attaches to the Wooden Camera Top Plate for the FX6 camera using the included 1/4"-20 screws, providing support to the adapter when using heavy cinema-style lenses.

Q: 10. can the microphone port still be accessed to plug in a microphone if it is attached to a tripod vertically?

A: Due to the L-component being situated on the right-side of the camera, certain accessories might be a little tight to squeeze in when mounted vertically. If you look through some of the photos, you'll see they were able to connect a microphone and light still, but your mileage may vary.