Surge Protector 5 Outlets

Surgex Ups-1000-li-2 Battery Backup And Surge Protector

Product Code: ga221524
Availability: In Stock

$6,597.00 $9,895.50

Qty

0 reviews Write a review

Description
Reviews (0)

The UPS-1000-LI-2 Battery Backup and Surge Protector from SURGEX helps protect your devices from spikes, surges, and electrical noise. It features six AC outlets, all of which are grounded. Four of these outlets provide battery and surge protection up to 1000VA/600W, while the remaining two outlets protect against surges up to 1800W at 15A. This unit operates using 120V and is powered using a 9' grounded, 3-wire #14 line cord. Other integrated features include a self-test circuit with a visual indicator, EMI/RFI filtering, monitoring and control functions via wired USB that are activated by software, and can withstand 1000 occurrences of surge pulse voltages up to 6000V.

120V / 15A Rating 6 x Total Grounded AC Outlets 4 x Battery & Surge Outlets 2 x Surge-Only Outlets Can Withstand up to 6000V Grounded 3-Wire #14 Line Cord (9') 1 x USB-B Port 2 RU Form Factor EMI/RFI Filtering

Key Specs
Total Outlets	6x NEMA 5-15R
Plug Type	NEMA 5-15P
Maximum Wattage	600 W
General
Total Outlets	6x NEMA 5-15R
Protected Outlets	4x NEMA 5-15R (Battery and Surge) 2x NEMA 5-15R (Surge Only)
Plug Type	NEMA 5-15P
USB Charging Ports	No
SmartSlot Interface	No
Coax Protection	No
Data Line Protection	No
Communications I/O	USB via USB-B
Power
Maximum Wattage	600 W
Nominal Input Voltage	120 VAC
Nominal Output Voltage	120 VAC
Load Capacity	1000 VA
Physical
Operating Conditions	41 to 104°F / 5 to 40°C at 5 to 95% Humidity
Certifications	UL, CSA
Cable Length	9' / 2.7 m
Material of Construction	Steel
Rackmount Size	2 RU
Dimensions (W x H x D)	19 x 3.4 x 10.9" / 48.3 x 8.6 x 27.7 cm
Weight	32 lb / 14.5 kg

Line interactive technology

Analytical software

Wiring fault detection

9' grounded line cord

Related Questions and Answers

Q: 1. Is this battery compatible with the ELB 400?

A: No. The following battrey is designed and made for the ELB 500.

Q: 2. Does this work for the X-T3 as well?

A: Yes. It says so under "Overview".

Q: 3. Can this battery be charged via the d-tap connector?

A: Yes, according to Lanparte you will be able to charge this battery through the D-Tap port.

Q: 4. Is this the same as the B1 battery?

A: No. The following battery is for the B10 unit only.

Q: 5. Does this contain a real thermal sensor like the Fuji battery or just a simple resistor to fool the camera or charger?

A: We checked with the manufacturer and the Watson NP-W235 Li-Ion Battery does indeed use a simple resistor that allows it to be used with the compatible Fujifilm cameras.

Q: 6. does the battery comes with charger?

A: No, the Interfit Li-Ion Battery for Badger Unleashed Flash Head does not include a battery charger. This would be a replacement spare battery by itself. If you are looking for a battery charger, the Interfit Battery Charger For S1 Monolight, B&H # INBCS1, would be compatible for your usage needs.

Q: 7. Why are other v mount batteries shippable, but this one is not?

A: Due to the size of the lithium cells in the battery it is considered a hazardous material and falls under different shipping guidelines.

Q: 8. Is this battery compatible with anton bauer inter-active 2000 chargers?

A: Yes, it should work just fine

Q: 9. How long does this take to charge with a Fujifilm charger?

A: Approximately 2.5 hours per battery.

Q: 10. Can I use this battery in a dvr120 dp video car recorder?

A: No, this battery is specifically made for particular Miops' products and will not work with your video car recorder.

There are no reviews for this product.