Lighting designers and mobile entertainers looking for a moving head spot/beam/wash light will appreciate the black JMAZ Lighting ATTCO SPOT 100, a bright LED moving head well suited for installations, small stages, lounges, bars, fun centers, one-off events, and mobile DJ applications. The fixture is powered by a 75W white LED and includes an 8-color color wheel and a 6-pattern gobo wheel. A 3-facet prism provides a more impressive show to cover larger areas.

The ATTCO SPOT 100 features variable pan/tilt settings, including 630, 540, and 360° pan and 270, 180, and 90° tilt, which can be inverted for setup for primary/secondary control or DMX. Additional features include standalone, sound activated, RF remote control (included), and DMX with 2-channel modes (11 & 13). The control panel includes an LCD menu with four-buttons for manual setup as well as two 3-pin DMX I/O. The ATTCO SPOT 100 includes an Omega bracket, powerCON power cord, a DMX signal cable, and a safety cable.

For Bars, Clubs, and Mobile DJs    1 x 75W White LED Light Source    0 to 100% Dimming and Variable Strobe    DMX, Show, and Sound Active Modes    Pan/Tilt: 630 / 270°    Pan/Tilt Invert Mode    14° Beam Angle + 3-Pin DMX I/O    Includes RF Remote Control    Includes Omega Bracket and Power Cord    Includes DMX Cable and Saftety Cable

• Light source: 1 x 75W white LED
• Long life LED (rated over 50,000 hours)
• 4 operating modes: Sound Active, Show Mode, DMX controlled, and RF Remote Control
• 9 built-in lighting shows
• 3-facet prism effect with variable speed and direction
• Motorized focus from near to far (8.2 to 98.4')
• 1 color wheel with 8 colors plus white
• 6 rotating Gobos plus open
• 11 & 13 DMX channels modes
• Electronic dimming: 0 to 100%
• 8-/16-bit smooth and precise resolution for pan/tilt movement
• 360 / 540 / 630° Pan and 90 / 180 /270° Tilt movement
• Pan/ Tilt invert mode for contrasting movement when fixtures are linked together
• 3-pin XLR connectors in/out
• Scan position memory, auto reposition after unexpected movement
• Includes omega bracket for truss mounting

Related Questions and Answers

Q: 1. Can I mount this ballhead on a Manfrotto 055XPROB tripod?

A: The Vanguard BBH-100 Ballhead is compatible with the Manfrotto 055XPROB legs. The Manfrotto 055XPROB legs have a 3/8-16 mount thread, as does the Vanguard BBH-100. The Vanguard also comes with a reducer bushing should you want to mount it onto a set of legs/monopod with 1/4-20 thread.

Q: 2. How about the perforation? single or double?

A: The ORWO NC400 ISO 16mm Color Film (100') is single perf film stock.

Q: 3. Does this come on a daylight spool?

A: Yes, the ORWO NC500 16mm Color Film (100') comes on a daylight spool.

Q: 4. What is the difference between this gvm 200w spotlight and gvm 100w spotlight?

A: The GVM200 is over twice as bright as the GVM 100 is the main difference.

Q: 5. Does the safety pin locks the peak design plate?

A: The Peak Design Dual Plate V2 can work with the safety pin on this Vanguard head.

Q: 6. It is compatible with the vanguard alta pro 263ab

A: Yes, this head is compatible with the Vanguard Alta Pro 263AB.

Q: 7. does it wiggle when there is wind?

A: While this head would not wiggle in windy conditions, it is important to stay within the load capacity of the head for the best stability.

Q: 8. Any specs on the output of this light at 1 or 3 feet? I want to compare it to a few other models.

A: As per the user manual for this light, the brightness is measured in lux. This light is able to produce 11500 lux without the reflector at a distance of 1 meter. When the reflector is attached, it can produce 7300 lux at 1m.

Q: 9. Can i use other big softbox like 35inch for this led light,is it compatible?

A: Yes this will work with other large softboxes as long as they have the Bowens mount.

Q: 10. Does this video light turn itself off suddenly during use?

A: Yes. The following unit will shut down automatically to prevent over heating.