Empower your gaming rig with the reliable and robust ASUS 850W TUF Gaming Gold Modular ATX Power Supply. Delivering ample power to your essential components, the TUF Gaming Gold balances electrical loads to ensure your entire system runs efficiently.

A single +12V, 850W rail drives power to your system following Intel's ATX12V Version 3.0 interface, with 80 PLUS Gold certification ensuring up to 92% efficiency. Alongside the CPU, EPS, SATA, PCIe, and peripheral connectors, a single dedicated 16-pin PCIe connector delivers up to 600W directly to your graphics card. A fully modular design enables you to pick and choose which cables you need, saving space within your case. The TUF Gaming also includes a PCB coating that protects against short circuits caused by moisture, dust, and other debris. A single 135mm axial-tech fan design and 105°C rated capacitors work together to reduce thermal buildup within the power supply, keeping your system active even under heavy loads.

850W Single +12V Rail    135mm Cooling Fan    ATX12V Version 3.0 Intel Form Factor    600W 16-Pin PCIe Connector    Modular Cable Design    80 PLUS Gold Certification    Protective PCB Coating    105°C Rated Capacitors

Related Questions and Answers

Q: 1. Good day, what are the notable differences with this 3G one compared to the previous HDMI to SDI Micro Converter model?

A: Newly designed with more video standards and timecode support.

Q: 2. I am trying to run the HDMI output from a Sony CX405 handheld camera to this BM HDMI to SDI 3G converter - then into a BM HyperDeck Studio Mini. The HyperDeck Mini is not recognizing the SDI out of the converter- but the output from the camera does display on a TV. Do I need to adjust settings on the camera?

A: We would suggest starting with a software update on the following converter. This should allow the unit to be recognized and push a signal through. If this does not work we suggest getting in contact with Black Magic support team directly.

Q: 3. Can this be used to monitor fullscreen images for Resolve and Avid, by using HDMI out to HDMI in?

A: No. This is a converter. To achieve the desired application you would use a Blackmagic Design UltraStudio Monitor 3G 3G-SDI/HDMI Playback Device - B&H#BLUSM3G.

Q: 4. I have a Panasonic HC-X2000. I would like to connect it in the following manner: camera (SDI) out to this converter SDI in, then HDMI OUT to a monitor & SDI LOOP OUT to ATEM SDI PRO ISO. Is this possible? I'm currently only getting a signal on the monitor (HDMI IN).

A: That set-up should work. Contact Blackmagic or B&H support if the problem persists.

Q: 5. Do the HDMI to SDI micro converters have a nominal SDI dB or dBm output spec?

A: Black Magic does not provide this info unfortunately. However the SDI port is a standard 3G-SDI connection.

Q: 6. what does wPSU benefit me ? why would i pick wPSU overt non-wPSU ?

A: The power supply unit would provide power to the USB-C port of the Black Magic Micro converter. You will need it if you do not have another solution for providing power.

Q: 7. Can I use this device with the previous BMD SDI to HDMI version on the other end? The one that doesn't have the 3G printed.

A: Yes, they are compatible.

Q: 8. Does this converter also carry audio from the camera into SDI?

A: Yes, audio is embedded from the Blackmagic Design Micro Converter HDMI to SDI 3G.

Q: 9. Does this work with the BMD Studio Micro camera control. The same way as with the Pocket cameras?

A: At the moment it does not. This will be addressed in a future update.

Q: 10. Can this be configured to add a delay to the audio signal as part of the conversion?

A: No.