Connect a monitor or wireless transmission system to your camera with this Canare LV-61S 6G-SDI Right-Angle Video Cable from DigitalFoto Solution Limited. The 3.9' long cable features right-angle BNC connectors at both ends, which are capable of handling video signals up to 6G-SDI.

6G-SDI BNC Connector at Each End    Cable Length: 3.9'

Related Questions and Answers

Q: 1. What is the processing delay in ms?

A: It is about 4 lines except when down converting which will be about a frame.

Q: 2. Does this convert the audio from the SDI as well, and does it sync properly, I want to use this to convert my main out from a Blackmagic ATEM TV Studio HD Switcher?

A: Carson,Yes this converter will pass the audio from the SDI input to the HDMI output and the 1/4 phone jacks. Yes it syncs properly. We use a number of these in our studio and in the field with no issues. Make sure your connections are secure and you should have no issues.DJ Video

Q: 3. Can it be powered by the mini usb port?

A: No, requires 12 volt power.

Q: 4. I see that it will downconvert to 1080p on the HDMI output when a non-4k device is connected, but will the SDI output still be 4k in this case? Looking for simultaneous 4k SDI out for recording and 1080p HMDI out to ATEM Mini

A: If the main stream is 4k over SDI the output of the converter will be setup to what the receiver, lcd or recorder wants. As long as the recorder is setup to receive and communicate to the converter it wants 4k that’s what will be available.

Q: 5. Could I use this device to convert the 8 bit 4.2.2 HDMI data coming out of the Sony a6300 to be recorded in my Oddesy 7Q, which only has 3G SDI input?

A: Yes, that should work.

Q: 6. does it convert 1080p to 4k?

A: No, this device does not convert 1080P to 4K.....4K is 4 times the resolution of 1080P (think 4 1080P signals combined). This device takes a video signal on an HDMI cable and converts it to an SDI cable. Why convert to an SDI cable? Because SDI cables can carry a video signal MUCH further than an HDMI cable can a video signal. What kind of input signals can this device handle and convert to SDI? It can handle video resolutions of 4K, 1080P and lower. But all it s does is convert the input signal from HDMI cable to SDI cable, it does not change the input resolution.....what goes in is what goes out....just over a different kind of cable that can handle longer distances than HDMI can handle. If you want to convert a signal from one resolution to another.....like 1080P to 4K or the reverse 4K to 1080P then you need a video scalar like this product from B and H......SC-HDM-HD42K 2-Port HDMI 4K Scaler from Avenview.

Q: 7. Can I convert an HDMI signal from iPad to SDI 1080i 59.94 for Atem studio switcher?

A: No. The iPad is 60 Hz output and the ATEM Television Studio will not accept 60 Hz output on SDI inputs.

Q: 8. Can I leave this unit plugged in?

A: Most of the racks that we install for clients are left on, but plugged into a battery backup/surge protector.

Q: 9. Is this unit compatible with the Blackmagic Decklink Quad card?

A: I can't think of any reason why this wouldn't work.

Q: 10. When is this arriving?

A: At the time of this posting, December 7, 2017, we do not have an ETA listed on our website for this product. Please keep an eye on this page for updates.