Control DMX lights over Ethernet with the Storm10 Ethernet to DMX Adapter from ENTTEC. The Storm10 is a compact device that effortlessly converts Art-Net, sACN, and ESP protocols into up to 10 universes of DMX/RDM for your lighting fixtures. It features RJ45 DMX outputs, an intuitive web interface, and multiple mounting options. With 10 rear DMX/RDM outputs and two front-facing ports, you get ultimate flexibility with individual settings configuration, including input protocol, output type, refresh rate, and merging options. The Storm10 delivers a huge amount of data to suit any project and create a unique lighting display. The device ships with an Ethernet cable and a power supply. Also included are mounting accessories that allow surface, DIN, or rack mount in half- or full-width rack spaces for any installation environment.

10-Universe Ethernet to DMX Adapter    RJ45 DMX Outputs    Converts sACN, Art-Net, or ESP to DMX512    Internal Buffer and Sync Logic    LED Status Indicators    Power over Ethernet or DC Input    Compact Unit, Intuitive Configuration    Surface, DIN, or Rack Mounting    Includes Ethernet Cable and Power Supply    Includes Mounting Accessories

• Converts fully compliant DMX using RJ45 outputs
• Single RJ45 Ethernet input port (10/100 Mb/s)
• 10 rear DMX/RDM ports
• Two forward-facing service ports duplicating ports 9 and 10
• Supports Art-Net, sACN, and ESP Ethernet protocols
• 5120 channels
• HTP/LTP merging support for up to two DMX sources
• Built-in LED indicators for status and connectivity
• DHCP or Static IP address support
• Compatible with third-party software and applications

You can send data to the Storm10 from a wide range of sources while its RDM capability allows you to get a quick status update of your connected devices and change basic settings remotely.

• Art-Net
• sACN
• DMX512

The Storm10's internal buffer and sync logic ensure you can build LED matrixes that span without experiencing any jitter, lag, content tearing, or timing issues. Thanks to ArtSync, multiple units can stay perfectly synchronized.

Designed to suit your project's needs, PoE and DC input are available for powering the device using Power over Ethernet or DC 12-24V input.

Users will appreciate the Storm10's intuitive configuration and simple, fast installation. Firmware updates are conveniently accessible through its localhost easy-to-use web interface. Furthermore, you can combine the Storm10 with the separately available S-Play controller to trigger or schedule lighting states.

With reverse polarity protection, the unit is designed to block DC power entering each of the data ports in the case of a short circuit or incorrect wiring. Additionally, the Storm10 was engineered with two layers of rock-solid surge protection for extra safety.

Related Questions and Answers

Q: 1. Has anyone used this adapter to adapt M-Mount Voightlander Nokton lenses to the L-Mount Sigma FP Camera Body? Is the adapter flawless during your use?

A: The Leica M-Adapter L (Silver) is mechanically superb. This is flawless during use.

Q: 2. Is there a conversion factor for aperture when using M lenses on leica SL or SL2?

A: There is no conversion factor when using Leica M lenses with Leica's M adapter L (Leica # 18771 in black).

Q: 3. Hi. can i use this Adapter with my lens 90mm f/2.8 +M9?

A: Sure!

Q: 4. With this Leica M Macro Adapter can I fit my APO 50mm f/2 on my SL2 by attaching this to my Leica M- L Adapter to take macros ?

A: The Leica Macro-Adapter-M will attach to the Leica APO-Summicron-M 50mm f/2 ASPH. Lens (Black). And it should work with most M to L mount adapters. Note it has not been tested with that adapter in that combination.

Q: 5. Is this also compatible with Hasselblad H mount lenses?

A: Absolutely! Works beautifully.Manual focus only,flash sync to1/800's

Q: 6. Exactly how does one focus a M style lens on the Leica CL using this adapter? Does the EVF work like a rangefinder when using M style lenses?

A: The CL magnifies the image in the viewfinder to help you focus. Only an M has a split image range finder.

Q: 7. Will this work with Voigtlander Ultron 35mm f1.7? Or other third party lenses for that matter? How close will this adapter focus with 35mm Ultron if it compatible?

A: Yes, it will work with any M mount lens, but I think it works best with longer lens such as 50 mm and more. Leica makes a 90 mm macro lens that goes with it.

Q: 8. Is there a conversion factor when using M lenses on Leca SL or SL2?

A: No, there isn't a conversion factor.

Q: 9. Can I use a USB-C to 3.5mm adapter to make this work for a PavoTube T8-7X?

A: The Nanlite Pavotube T8-7X has its own DMX cable adapter such as the Nanlite USB Type-C to DMX Cable for PavoBulb and PixelTube (10"), BH # NACBDMXUSBC1. http://bit.ly/3X5tz5b

Q: 10. How does 6-bit coding work here? Camera can only recognize this adapter and can't recognize which (coded)lens is attached to it?

A: No, the following lens will send no passive exif or metadata as it is a all manual lens Specifically designed for the Leica Macro-Elmar-M 90mm.