Monitor an indoor or outdoor area with the ColorVu DeepinView 4MP Network Dome Camera from Hikvision. This unit uses a 1/1.8" progressive scan CMOS sensor to capture 2688 x 1520 resolution video at 60 fps. Supplemental IR and white light provide up to 98' of illumination for recording full-color video in low-light conditions. The camera's 2.8 to 12mm varifocal lens delivers a 104.2 to 44.1° horizontal field of view. Two-way audio is possible thanks to two built-in microphones and a speaker, along with an audio input and output. A memory card slot accepts microSD/SDHC/SDXC cards up to 256GB (available separately). Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable.

This camera complies with ONVIF profiles G, S, and T, making it compatible with a wide range of surveillance devices. It is housed in an IP67-, NEMA 4X-, and IK10-rated aluminum enclosure for outdoor use in areas at risk of vandalism. An integrated heater ensures the camera will be operational in temperatures as low as -40°F.

2688 x 1520 Resolution at 60 fps    98' of IR & White Light Illumination    2.8-12mm Varifocal Lens    104.2 to 44.1° Horizontal Field of View    Two-Way Audio    microSD Slot Supports up to 256GB    RJ45 Ethernet Port with PoE Technology    Complies with ONVIF Profiles G, S & T    IP67 & NEMA 4X Rated for Outdoor Use    IK10-Rated Vandal Resistance

Multitarget detection supports simultaneous detection and capture of the human body, face, and vehicles (seven face features, 13 human body features, and two vehicle features)

Face capture detects up to 60 faces simultaneously, supports left and right swings from -60 to 60°, tilts up and down from -30 to 30°, and uploads face with background and close-up face images

Face comparison supports up to 10 face libraries (30,000 faces for each library), 150,000 faces in total, and face library encryption

People counting, heat mapping, and queue management with report generation for data collection and efficiency

Hard hat detection detects up to 30 human targets simultaneously and supports up to four shield regions

Metadata for analytics

Regional people counting

On/off duty detection

Related Questions and Answers

Q: 1. what is flash duration t.01?

A: t.01 is the amount of time for a flash to fire and then the light to drop to 10% of the flash.

Q: 2. does this kit comes with a stand?

A: No

Q: 3. Does a battery charger come with the unit or is it purchased separately?

A: Yes, comes with. In the Box Godox AD400Pro Witstro All-in-One Outdoor Flash Li-Ion Battery Battery Charger Reflector Flash Tube Power Cord Bowens Mount Adapter Ring Wrench Carry Bag Limited 2-Year B&H Warranty

Q: 4. This comes up on the accessories list for the Godox tt350 flashes. Can anyone confirm that this is a good fit?

A: This can serve as a good replacement for the diffuser that normally comes with the Godox TT350.

Q: 5. Do you get modeling light capabilities on battery power? Or do you only get use of the modeling light when on A/C power? Note Decryption: "Alternatively, you can run the monolight on AC power with an optional adapter."

A: You can get a modeling light on battery

Q: 6. if i had a Godox V860II-S mounted on my camera can i wirelessly trigger the Godox AD400Pro as i do any another V860II-S flash in master/slave mode?

A: Yes the V860II can be a master for the Ad400Pro.

Q: 7. I have both the Phottix Oden wireless triggers and Phottix Pro wireless triggers for Canon cameras. Will these triggers work with the Godox AD400Pro or will I have to buy the Godox trigger?

A: Phottix system will not work I would suggest looking into the following godox commander in order to drive your systems. Godox XProS TTL Wireless Flash Trigger https://bhpho.to/3kl7mOQ

Q: 8. What does Witstro mean?

A: Wistro is a model series.

Q: 9. Will this connect to my Godox S2 Bracket, or do I need something else?

A: The Godox AD600Pro Witstro All-in-One Outdoor Flash BH #GOAD600PRO does not need an S2 bracket it has a Bowens mount built in.

Q: 10. Im gonna buy Softbox with Bowens Mount (48") for this unit, is this right size or should I take smaller (36 or 26")?

A: It will work