Connect a monitor or wireless transmission system to your camera with this Canare LV-61S 6G-SDI Right-Angle Video Cable from DigitalFoto Solution Limited. The 6.5' long cable features right-angle BNC connectors at both ends, which are capable of handling video signals up to 6G-SDI.

6G-SDI BNC Connector at Each End    Cable Length: 6.5'

Related Questions and Answers

Q: 1. Can the on-board audio jacks be used to de-embed audio signal from the HDMI input to analog audio out.

A: The HDMI to SDI 6G has analog audio inputs for embedding. It does not de embed.

Q: 2. Does the audio embed into the HDMI Signal and is it delayed?

A: Agree also. Have not noticed any audio delay from video. Use it among other things to drive a large hallway monitor so people outside the worship can watch/listen.

Q: 3. Is this compatible with Mac OS 10.10.5?

A: The setup program has a minimum requirement of 10.12 but some of these applications will work on earlier OS versions. You could test this by downloading the app and seeing if it will install. That said, you only need to install the app if you are going to update firmware on the device.

Q: 4. Is this converter or others able to convert the 10-Bit 1080i SDI signal from a camera into a 8-Bit 1080i HDMI signal for older monitors that cannot handle 10-bit?

A: Works with 49 LG 4K TV, at least with Blackmagic Production 4K set to 30.00 fps, TV shows 2160p 30HZ .

Q: 5. Can this be used to convert HDMI from Camera to SDI out to the mixer?

A: Hi, If your audio mixer (or do you mean video switcher?) accepts SDI connections, then yes, this would work.

Q: 6. I WANT TO USE MY LATOP'S HDMI OUTPUT AT MY PAL SD-SDI VIDEO SWITCHER ?

A: If you have PAL video on your computer, the Blackmagic Design Mini Converter HDMI to SDI will support that signal and change it to SDI for your PAL switcher. If you have NTSC in your computer, you will need a signal converter. Please see attached.

Q: 7. I am wanting to connect a 2013 iMac to a ATEM Television Studio Pro 4K. Would this Converter work if I used Mini DisplayPort to HDMI from the iMac, to the HDMI in on this Converter, and then passed SDI to the Switcher?

A: Hi, I don't have the switcher, but I do have the Blackmagic HDMI-SDI 6g, and an atomos shogun inferno, and a 2012 MacMini. I was able to see output from the Mac Mini at 1080p, but did not see any choices for higher resolution. I'm not sure that you can even pass 4:2:0 2160 signal at 30fps over a 3g input Blackmagic does make an admittedly more expensive HDMI - SDI convert to pass full UHD, BH #BLTRMHDMISDI • MFR #CONVNTRM/AB/HSDI (the Blackmagic Design Teranex Mini HDMI to SDI 12G Converter). I'm not a B&H employee, but they have a very reasonable return policy; you could ask if they wuold let you try the cheaper one, and if it didn't work, exchange it with more $$ for the faster one.

Q: 8. Can this downscale 4k DCI (through 6G SDI) into 1080p (through HDMI)? It says it can downscale UHD (3840x2160), but can it also do 4K DCI (4096x2160)?

A: Yes, it will do that but the max frame rate for DCI 4K is 24p. Max UHD is 30p.

Q: 9. Can I leave this unit plugged in?

A: Most of the racks that we install for clients are left on, but plugged into a battery backup/surge protector.

Q: 10. I would like to use my Sony FX1 as a webcam for Skype, Would this work?

A: It will work to convert to SDI. To stream to Skype using Blackmagic gear you could use the Web Presenter instead.