You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Digitalfoto Solution Limited V-mount Battery Power Charger With D-tap (2')

Digitalfoto Solution Limited V-mount Battery Power Charger With D-tap (2')
  • Product Code: ga222701
  • Availability: In Stock

$78.00 $115.44

Charge your V-mount batteries with this V-Mount Battery Power Charger with D-Tap from DigitalFoto Solution Limited. Connect the D-Tap end of this 2' long cable to the V-mount battery you wish to charge and plug in the AC adapter, which will provide 16.8V at 3A. 

Single D-Tap Charger    For V-Mount Batteries    Powers with 16.8V, 3A

Key Specs
Charger CompatibilityD-Tap/P-Tap
Charger Power SourceAC Power (Cable Included)
Charger Power I/O1x IEC Female Input
 • 100 to 240 VAC, 50 / 60 Hz
1x Built-In Cable with D-Tap/P-Tap Male Output (2' / 1.4 m)
 • 16.8 VDC at 3 A (50 W)
Charger Included Adapter / Cable1x USA Type-A/B Plug to IEC Male Cable
Battery Charger
Charger CompatibilityD-Tap/P-Tap
Number of Battery Bays1
Charger Power SourceAC Power (Cable Included)
Charger Power I/O1x IEC Female Input
 • 100 to 240 VAC, 50 / 60 Hz
1x Built-In Cable with D-Tap/P-Tap Male Output (2' / 1.4 m)
 • 16.8 VDC at 3 A (50 W)
Charger Included Adapter / Cable1x USA Type-A/B Plug to IEC Male Cable
Packaging Info
Package Weight0.49 lb
Box Dimensions (LxWxH)8.4 x 5.8 x 1.4"

Related Questions and Answers

Q: 1. Would this power a SmallHD Cine 7 for longer than 2 of these: https://www.bhphotovideo.com/c/product/836000-REG/watson_b_4206_np_f975_battery_pack_f_sony.html

A: Yes, the V-Mount battery would provide a considerably longer run time.

Q: 2. Will this also work for the FS5?

A: No, this does not fit the PXW-FS5. This device has to fit into the camera's battery box plus fits into screws that are on top of the PXW-FS7. The PXW-FS5's viewfinder would also be in the way of this fitting.

Q: 3. Can the D-tap connection also be used as an output?

A: Yes, the Neewer BP-95W has one D-Tap / P-Tap Input 16.8 VDC that can output power for your devices.

Q: 4. Will this (Wasabi Power Battery Charger for Garmin VIRB and VIRB Elite) charger work for the Wasabi BTR-BP727-JWP (wasabi bp727)? (That wasabi battery works for/is compatable with the canon vixia hf r300. They generally can be bought as 2 batteries with a charger. My charger is broken.)

A: We have no information regarding this product and compatibility with the Wasabi BTR-BP727-JWP.Charges Garmin 010-11654-03 batteries, which are used with the following Garmin devices:AlphaMontana 600Montana 600tMontana 650Montana 650tMonterraVIRBVIRB ElitePlease contact the manufacturer directly:e-mail: info@bluenook.comphone: (877) 268-1235

Q: 5. Are these battery packs safe for air travel? The calculation of amp hrs. and voltage puts them over 100wh(14.8v x 6.8ah=100.64wh)? I travel a bit and internationally they always look at the amp hrs.

A: IndiPro Tools rates these batteries at 98Wh and the battery has IATA Compliant Carry-ON listed on the front. You will want to check with your airline before traveling, however this battery should be safe to travel with.

Q: 6. Is this charger compatible with Core SWX HyperCore batteries?

A: Yes, will work with any batter with a unregulated D-tap output

Q: 7. Does this charger work with the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery? BH #INVMP98S Thank you.

A: Yes it does

Q: 8. Which setup will work with black magic 6k pro?

A: The IndiPRO Tools 2 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual V-Mount Battery Charger Kit will support the Black Magic Pocket 6K Pro when using the following DTAP cable to power the camera from the Battery. SOONWELL Coiled D-Tap Power Cable for Blackmagic Design Pocket Cinema Camera 4K/6K BH #SODB01

Q: 9. Can this charger charge 14.4v batteries?

A: Yes, The IndiPRO Tools D-Tap Pro battery charger will charge 14.4v V-Mount / Gold Mountbatteries that allow D-Tap charging.

Q: 10. Will this battery work with the Litepanels Astra 6X? If so, how much runtime will it provide?

A: Yes this Micro-Series 120Wh V-Mount battery will work with this light. As for the run time it can vary depending on the dimmer and the color temperature levels. If you were to run the light at 50% this battery would last approximately 2 hours of run time.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Arri Cable Udm - D-tap (2.6')

$750.00 $1,177.50

Watson D-tap Dummy Battery (l-series Np-f)

$107.97 $169.51

Cartoni Dual D-tap Cable For Lifto 25

$210.00 $260.40

Products You May Like

Global Truss Safety Cable (30")

$21.00 $33.60

Canon Pfi-007c Cyan Ink Tank (90ml)

$194.97 $255.41

Ice Solid Nd Filter Kit (49mm)

$134.85 $186.09

Azulle Access Pro Mini Pc Stick (linux)

$929.97 $1,339.16

Tiffen 82mm Black Satin 1/8 Filter

$449.97 $539.96