The IFBlue IFBR1C is a compact, single-channel bodypack IFB receiver compatible with transmitters available from Lectrosonics including the IFBT4 or any Digital Hybrid Wireless transmitter in IFB-compatibility mode. It provides simplicity and flexibility in a tough package that is intuitive for untrained users to operate. The receiver is ideal for talent cueing and crew communications, or for directors who need to monitor program audio in broadcast and motion picture production.

The IFBR1C features a rugged, injection-molded ABS housing that's comfortable to wear and easy to conceal. It runs up to twelve hours on two rechargeable AA NiMh batteries (included). The unit's LED indicator changes color from green to red as the battery voltage declines to provide plenty of warning before operation ceases. Up to four IFBR1C can be simultaneously dock-charged with the companion CHSIFBR1C battery charging station (available separately).

The receiver's 3.5mm output drives a wide variety of earbuds, headphones, and induction neck loops—with loads from 16 to 600 ohms—at substantial levels. Monaural earpieces are automatically accommodated with no loss of audio output or battery life. The output jack is also the receiver's antenna input, with the earphone cord acting as the antenna.

A single power/volume knob and intuitive controls with a backlit LCD screen keep operation simple. 10 presets are available, allowing you to store frequencies in memory for quick setup on set. The included wire belt clip makes it easy to secure the receiver on a wide variety of belts, pockets, and fabrics.

In spite of its tiny size, the cost-efficient IFBR1C offers excellent performance on par with all Lectrosonics IFB products.

4 x IFB Receivers for Talent and Crew    4-Slot Charging Dock with AC Cord    Works with Lectrosonics IFB Transmitters    Works with Lectrosonics Digital Hybrid    Use with Earbuds, Headphones, Neck Loops    Compact Design, One-Knob Operation    12 Hours on Rechargeable AA Batteries    Stores up to 10 Frequency Presets    Rugged Injection-Molded ABS Housing    LCD Interface for Programming/Operation

• The IFBR1C uses ±20 kHz FM deviation for efficient use of the bandwidth. The compandor noise-reduction circuitry delivers an excellent signal-to-noise ratio. A supersonic Pilot Tone signal controls the audio output squelch to keep the receiver silent when no transmitter signal is received. The incoming RF signal is filtered and amplified, then mixed down to the IF frequency using a microprocessor-controlled synthesizer.
• The receiver's high-sensitivity design provides extended operating range both indoors and outdoors.

• The IFBR1C provides simple, one-knob operation for on/off and audio level, and easy, on-the-fly programming with fast frequency adjustments. Basic operation is simply a matter of rotating the knob to turn power on and adjust the volume level.
• On the side panel, membrane switches and a backlit LCD interface let you quickly select frequencies and save/recall presets.

• There are 10 presets available for programming the IFBR1C. The stored frequencies remain in memory during power Off and even with the battery removed. Use the Up and Down arrows to scroll through the previously selected frequencies stored in the IFBR1C and quickly change frequencies for quick communication.

• USB port for firmware updates.
• Attached battery door.
• Battery life: 10 hours (Alkaline), 12 hours (NiMh), 20 hours and 40 minutes (Lithium).
• Side contacts allow for recharging the NiMh batteries without removing them from the the IFBR1C—requires the optional CHSIFBR1C battery charging station (works with NiMh batteries only).

Related Questions and Answers

Q: 1. With the 20tb 1 big dock can i purchase and use this drive as a swappable drive? 22TB IronWolf Pro 7200 rpm SATA III 3.5" Intern

A: The LaCie 20TB 1big Dock supports a maximum storage capacity of 20TB, a larger 22B drive would not work inside the dock.

Q: 2. I need to connec to 220 vts, is it possible? or do I need a transformer? Thank you.

A: A transformer will be needed to connect to 220V for this 1big Dock.

Q: 3. I've downloaded the app on my phone but can't log in because I don't have an account, yet no option to create one? What to do?

A: You will need to contact the manufacturer for assistance with their app.

Q: 4. Once daisy chained to another 1 Big, can you then run RAID 1 using one drive as the main and the other as the mirrored drive?

A: The LaCie 16TB 1big Dock (BH #LASTHS160008), can be used in a Raid 1 configuration while daisy-chained. This can be achieved with the use of a 3rd party software raid management tool.

Q: 5. Lacie's website says you can swap in other hard drives into the unit. Can any SATA 3.5" HDD be used in the enclosure, or are there specific drives that have to be used?

A: Any 3.5 SATA HDD should work. However, LaCie does have a recommended list of drives on their site.

Q: 6. Is this fast enough to use for editing video projects in Davinci or Final Cut Pro? Mostly 4k files from sony alpha (6000 series) cameras.

A: This LaCie drive has a very fast interface, and a 7200 RPM drive inside, however live editing 4K video would benefit from being on an ssd type drive with regard to rendering files directly live on the drive. The 1big will work, but you may be waiting for some renders and large transfers.

Q: 7. Are these Bluetooth, wifi, DMX?

A: This lamps use Bluetooth for control.

Q: 8. I have an iMac with thunderbolt 2 ports. Will this thunderbolt 3 hard drive work with the supplied cable and the Apple thunderbolt 3 to thunderbolt 2 adaptor?

A: This LaCie 4TB 1big Dock can work with your iMac if you use a Thunderbolt 3 to Thunderbolt 2 adapter.

Q: 9. Can it read both SD and XQD? Thank you

A: The following cards are supported: SD/SDHC/SDXC, CompactFlash.

Q: 10. Can I edit my RAW photo files and Creative Cloud files directly from this drive?

A: Yes, the LaCie 8TB 1big Dock can be used for live editing of any files located on the drive, in any editing software you use, including Adobe and others.