The IndiPRO Tools 81PPC 24" 2.5mm to Canon LP-E6 Type Dummy Battery Cable is designed to work with optional select IndiPRO Tools POWER POD systems to provide power to devices that accept Canon LP-E6 type batteries. The cable is 24" long and polarity tested with the optional POWER POD systems, so you don't have to worry about crossed polarity when powering devices.

For Select IndiPRO Tools Power Pods    24" Long    Polarity Tested

This 24" long cable features a 2.5mm coaxial power connector to a Canon LP-E6 type dummy battery.

Although you can use this cable to connect optional power solutions with a 2.5mm connector to power your device, the cable has only been polarity tested with the optional IndiPro Tools POWER POD Dual & Quad LP-E6 (7.2 & 14.4 volt) battery mounting plates.

Please note that this cable is not power regulated and will pass whatever voltage through it that you connect the cable to.

Related Questions and Answers

Q: 1. I want to power this from another 12V source. But I don't see anything indicating if the power supply is center-positive, or center-negative. Any idea where to get that info?

A: The power supply is center-positive. Please let us know if you have any more questions.

Q: 2. What is the length of the cable?

A: The IndiPRO Tools D-Tap to Canon LP-E6 Type Dummy Battery for R5 C Cameras BH #INDTCR5C cable length extends from 22" to 36".

Q: 3. Will this power a Zacuto Gratical HD EVF?

A: Yes, When connecting the IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable to the Zacuto Zacuto Gratical HD's LPE6 battery port you will be able to power the EVF.

Q: 4. Does this provide the higher voltage to run the r5c at 8k60 raw?

A: Yes, the IndiPRO Tools D-Tap to Canon LP-E6 Type Dummy Battery for R5 C Cameras is sufficient for 8K60P RAW on the Canon EOS R5C.

Q: 5. Hi, I have a battery plate with both 8v and 12v barrel ports, so I should use the 12v port?

A: The IndiPRO Tools 2.5mm DC to LP-E6 Dummy Battery Cable (Regulated, 24") regulates the output to 7.2V so you could use either of your ports to power the battery.

Q: 6. Will this product work with my Indipro Quad Power Grid 4 Bay Dmwblf19 Battery Adapter For Panasonic Gh4, and connect to a Black Magic Design 4K Video Assist? There are two power cables out, so can I power the GH4 and the monitor?

A: This cable has only been polarity tested with the IndiPro Tools POWER POD Dual & Quad LP-E6 (7.2 & 14.4 volt) battery mounting plates. It may not work properly with other IndiPro Tools Power Grids.

Q: 7. what is the difference between this and https://a href= http://www.bhphotovideo.com/c/product/1077443-REG/indipro_tools_ptlpd_power_tap_for_canon.html target= _blank www.bhphotovideo.com/c/product/1077443-REG/indipro_tools_ptlpd_power_tap_for_canon.html/a ?

A: Doesnt look like any difference. But I would be cautious buying the indiepro...I bought 3...and only 2 still work.

Q: 8. How could I use this to take power from the Ronin-S battery?

A: You cannot use this, as the Ronin S offers no d-tap/p-tap ports for this device to work.

Q: 9. Is there a minimum voltage to power this? Can I use a 9v-12v source?

A: Voltage has to be over 9V

Q: 10. Is there a minimum power voltage for this unit? Can I use a 9-12v source?

A: Since this is designed for use with a specific battery, the Canon LP-E6 and the only voltage listed is 7.2 volts, I would have to say no. You would have to proceed at your own risk. If you wish, email us with your set up of power source, cable and camera you wish to power and we will see what answer we can find for you. provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a