Are you looking for a powerful PA system for your sports venue or special event? Check out the Anchor Audio LIB2-RU2, a Liberty 2 portable PA system with Bluetooth, an AIR wireless receiver, and a dual wireless microphone receiver. With 200W of rated output power driving a 10" woofer and a ceramic compression driver to produce 117 dB SPL, it is designed to deliver versatile and powerful amplification for crowds of up to 1500 people in sports venues, educational facilities, and various indoor and outdoor events.

The built-in Bluetooth receiver allows streaming of music from your smartphone, tablet, or laptop. Two XLR-1/4" combo jacks, a 1/4" line input, and a 3.5mm stereo mini jack provide connectivity for wired mics, instruments, line-level sources, and non-Bluetooth devices. Connect two wireless mics (available separately) via the included dual wireless microphone receiver. The balanced 1/4" output can be routed to another PA system or an audio recorder, while the 4-pole speakON output can power a Liberty 2 companion speaker (available separately). Integrated mixer functions include volume controls and 2-band equalization.

The supplied AIR wireless receiver enables cord-free connection to a compatible Anchor product up to 300' away. Power the Liberty 2 via AC power or the built-in rechargeable lithium-ion batteries, which offer approximately six to eight hours of operating time on a single charge. The integrated carry handle and pole mount simplify the physical setup of the system.

Reaches Crowds of up to 1500 People    Integrated Pole Mount & Carry Handle    Built-In Bluetooth Receiver    AIR Wireless Receiver    Dual Wireless Mic Receiver    200W of Rated Output Power    10" Woofer & Ceramic Compression Driver    Integrated Mixer & 2-Band Equalizer    Built-In Rechargeable Batteries    XLR, 1/4" & 3.5mm Inputs, 1/4" Output

200W of rated output power through a 10" woofer and a ceramic compression driver

117 dB maximum SPL reaches crowds of up to 1500 people

External 4-pole speakON speaker output powers a Liberty 2 companion speaker (available separately)

Built-in Class-1 Bluetooth for streaming music from a mobile device

Includes an AIR wireless receiver for cord-free connection to other Anchor products up to 300' away

Connect up to two wireless mics (available separately) via the two included dual wireless microphone receivers

Built-in rechargeable lithium-ion batteries provide approximately six to eight hours of operating time on a single charge

Integrated pole mount and carry handle

Made in the USA

Related Questions and Answers

Q: 1. Which Nissin flashes does the Nissin Air Commander directly interface with, without the Air R?

A: Right this minute, the Air 1 interfaces only the DI700 (GN 54). However, the i60 (GN 60) is due out any day now to a month or two depending on what camera lens mount you have.

Q: 2. Is this receiver compatible with the newer Sony HVL-F60M flash, which has the Mi shoe interface?

A: Yes, it does, but for it to work make sure the transmitter has the latest firmware for Sony

Q: 3. Will Sony flashes (HVL-F43AM via Adapter ADP-AMA, or HVL-F43M without adapter for example) work with Nissin Air R and Air Commander?

A: I don't know. I bought the Nissin for my Nikon system and could never get them to work so I sent them back. Look at Phottix or Godox (sold under many names) for my wireless trigge/commander for a better system. I ended up getting both and love them.

Q: 4. Will the Air R work with the Sony HVL-60M and a Nissin Air 10s that's mounted on a Sony A7 Riv ?

A: Yes, the Air R receiver for Sony can fit the bottom of the HVL-F60M flash so it can be triggered by the Air 10S trigger mounted on the Sony A7R IV.

Q: 5. Is there thumbwheel compatibility?

A: The Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth is compatibile with the CTRL.3 Wireless Lens Controller.

Q: 6. Will the Nissin s40 work with this receiver?

A: Yes, The i40 for Sony will work with the Nissin Sony Air R receiver once it is available. You must use the Sony Air 1 Commander to control the i40 Sony in this case.

Q: 7. I bought the Nissin Air commander kit (A. Comm. with the matched i700A flash. I have an older Nissin Di622 Mark II flash. Will this Air Receiver work with it? (The Di622) I'm shooting a Nikon system. Thanks!

A: I shoot Canon and it works perfectly for there flashes on a Sony system. I am positive they would work for Nikon flashes. The older flash I can not say because they are system dependent.

Q: 8. Will this work with Godox, Profoto, and other studio strobes? I've been waiting for Nissin to make an equivalent strobe like the Profoto B2 for more power than their current offering. So will this trigger studio strobes with TTL and most importantly HSS?

A: No it will not trigger your strobes with TTL or HSS. The Air R receiver is primarily made to work with Sony MIS flashes. In this case, it will support TTL and HSS with those flashes. The Air R receiver does have a PC out so you can trigger a studio strobe but that is all. You would have no control what so ever of the studio strobe.

Q: 9. Is this receiver compatible with the Yongnuo 600rt flash (canon compatible) allowing me to use the x100f Fuji camera and trigger the Yongnuo with TTL capability? Thanks!

A: If this receiver is Canon compatible it will work with any Canon shoe flash.

Q: 10. Presently I have a Metz Mecablitz 64 for Nikon and a Nikon D610. Will the Air R allow use of TTL radio control of the Metz by the 610 (with, of course, the updated firmware Nissin Air 1 installed on the 610)?

A: Since the Air R Receiver works with Nikon compatible flashes with i-TTL capability, it could work with the Metz Mecablitz 64AF-1 for Nikon. However, we are not aware of any tests that confirm this.