The PDS-4K UHD 4K HDMI & 12G-SDI Presentation Switcher  from Barco offers high-quality UHD 4K processing with single screen and dual screen. Six HDMI 2.0 inputs, two 12G-SDI inputs, and four 12G-SDI outputs with ultralow latency processing, provide smooth video playback and seamless transitions between inputs to maximize audience engagement. Two live inputs may be shown simultaneously with the available PiP layers, and superior signal clarity and minimum scaling artifacts are achieved thanks to the Event Master Athena scaling technology.

The intuitive PDS-4K switcher allows you to easily switch between the input sources and navigate among the preconfigured layouts, and it is fully compatible with all Barco visualization solutions and presentation devices such as ClickShare. Thanks to the API, the switcher can be combined with Barco Overture or other third-party control panels and controlled with the Event Master toolset. A vast range of optional cards ensure expandability and future-proof upgradability.

Single- and Dual-Screen 4K Switching    6 x HDMI 2.0 & 2 x 12G-SDI Inputs    4 x HDMI 2.0 & 4 x 12G-SDI Outputs    Show up to 2 x Live Inputs Using PiP

• Dual-screen and quad-screen switching
• Ultralow latency processing of two frames at 60 Hz
• Show up to two live inputs simultaneously in PiP
• One mixer per PGM output
• 1 x HDMI multiview output
• Luma and Chroma on on-mixing PiPs
• USB inputs to upload up to eight stills or perform firmware updates
• HDCP 1.x and 2.2 compliant

• Front-panel mappable buttons
• Event Master screen management software for Windows or macOS
• Separately available Event Master controllers
• WebUI, Ethernet RJ45, 1000/100/10 Mb/s autosense

Related Questions and Answers

Q: 1. Can the Shinobi do pulldown on a C100, for example, and output 1080P?

A: The Atomos Shinobi 7" 4K HDMI/SDI Monitor can support all resolutions and frame rates the C100 can output.

Q: 2. Will this monitor have any latency or lag with a Panasonic GH5 when using for focus and shooting "run and gun" style?

A: HDMI has an inherent delay regardless of the device. You can experience lag from the cable length or port on either end. If you want a zero delay experience, you can use the 3G-SDI input with a camera that can output it.

Q: 3. How much does the Shinobi 7 weigh? Is it nice and light like its 5" counterpart? Related to its weight, what is the outer shell made of - plastic or metal?

A: The Shinobi 7 weights 577g or 1.04lb and is made of a Polycarbonate ABS Plastic.

Q: 4. Will this support the Sony DSC RX10IV with all functionality?

A: No, the Atomos Shinobi 7" 4K HDMI/SDI Monitor will not have camera control support for the Sony Cyber-shot DSC-RX10 IV Digital Camera. You should consider the PORTKEYS LH5P II 5.5" Touchscreen Monitor with Camera Control for Sony FS5/FS7/FX6/FX9 (BH #POLH5PIISLNC • MFR #LH5P II -SLANC) instead.

Q: 5. Will this monitor work with an Arri Alexa XT in arriraw or any other formats?

A: The Atomos Shinobi is a universal display that supports HDMI and 3G SDI. It would work with Arri cameras that output SDI. The Atomos Shinobi also supports loading LUTS as well for monitoring your cameras output.

Q: 6. It has "Coax (16.8 VDC) Input". What cable can I use to power it? Is it 2.5mm locking barrel?

A: Yes. The DC input is a locking DC coaxial barrel power input connection. The power adapter is included.

Q: 7. Will the Shinobi 7 cross convert from SDI in to HDMI out?

A: Yes, The Atomos Shinobi 7 allows you to cross convert between HDMI and SDI.

Q: 8. Can you record to the SD card?

A: No, the SD card slot is used to input LUTs and firmware updates.

Q: 9. Is this compatible with the Canon C70?

A: Yes. The Atomos Shinobi 7" is compatible with the Canon C70.

Q: 10. can go in hdmi and out sdi?

A: Yes, you can use the HDMI IN and SDI OUT simultaneously with the Atomos Shinobi 7.