Build your dream enclosure by combining two Mantis cases with the Tiptop Audio Dual Mantis Studio Bracket, a pair of white brackets that let you connect two Mantis' together for a robust and elegant solution. Recommended for studio use as it is designed for a fixed setup and would not be suitable for travel or gigging.

The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

Combine Two Mantis Eurorack Cases    For Permanent Studio Use    Precision Laser Cut from Sturdy Metal    Smooth Coated Finish    Includes Mounting Hardware

Related Questions and Answers

Q: 1. Does the Talkback 4K come with the Fiber connector as pictured in your description for the Talkback 4K interface? Can I connect BMD Talkback 4K Fiber Connectors to the BMD Studio Fiber connector and have intercom at the BMD URSA Broadcaster Camera Fiber back?

A: The Talkback 4K does not include fiber SFP modules, they can be purchased separately: 3G - https://www.bhphotovideo.com/c/product/654839-REG/Blackmagic_Design_ADPT_3GBI_OPT_Adaptor_3G_BD_SFP.html 6G - https://www.bhphotovideo.com/c/product/1076394-REG/blackmagic_design_adpt_6gbi_opt_adapter_6g_bd.html 12G - https://www.bhphotovideo.com/c/product/1447935-REG/blackmagic_design_adpt_12gbi_opt_12g_bd_sfp_optical.html Yes, you can connect the Talkback 4K to the Studio Converter to get talkback on an URSA Broadcast camera with a Fiber Converter attached. You will need an ATEM switcher to pass the talkback channels through. Newer ATEM switchers have talkback built in, so you only need the Talkback 4K if you're using an older model. Consult your manual to see if your ATEM model has talkback built in.

Q: 2. Will a breakout cable be available for the tally intercom interface?

A: As requirements for this would be custom, you will need to make one yourself.

Q: 3. How would people without the camera converters get tied into comms?

A: You can use the Mini Converter Optical to SDI and connect to our cameras supporting talkback. The Television Studio Cameras have an optical IO if desired.

Q: 4. Will this device still pass CCU to cameras?

A: Yes, it will pass CCU to the cameras.

Q: 5. Will this unit work with the Blackmagic Studio Camera 4K?

A: Yes, I've used it with 4 BMD Studio 4K cameras and Hyperdeck Studio Pro 2 to record in 4K

Q: 6. Will this work with an AKG 414 XLS? That mic has more of a tappered square shape.

A: Yes, the Rycote InVision Studio Kit with USM can be used with the AKG C414 XLS Large-Diaphragm Multipattern Condenser Microphone.

Q: 7. Needing to connect to existing Telex intercom system. Can I connect this directly to a Telex PS15 by building my own DB25 cable or do I need an interface (Telex DSI-2008) to make them work together?

A: The connections to the Fiber Converter require a 4 wire interface. You would need a 2 wire to 4 wire interface. Then build a custom cable with DB-25 for our end and whatever the 4 wire interface needs.

Q: 8. What is the minimum WS? I see the maximum is 300ws, what is the range and minimum?

A: The range of the Godox SK300II-V Studio Flash Monolight is 1/1 to 1/16th a 5 stop range. At minimum power that is about 16w/s.

Q: 9. Is there a single mode Fiber Camera Extension for black magic? If these are at a stadium and my control room is 1/2 mile away?

A: Currently there is no Blackmagic single mode fiber extension for the Blackmagic Design Studio Fiber Converter. You may wish to consider the Sony Single Mode Fiber Camera Extension Adapter BH #SOHDCE100 • MFR #HDCE100.

Q: 10. Is the output of LED modeling lamp close enough to the halogen version to mix the two?

A: Yes, the LED modeling lamp in the Godox SK300 II-V would be close in output to its halogen equivalent.