Modular synthesizer enthusiasts in search of a low-cost professional Eurorack enclosure will be impressed with the white / green legs Tiptop Audio Mantis Case, a rugged 2 x 104 (208) HP Eurorack case that's lightweight (6.5 lb) and portable. The Mantis case features three different positions (0, 5, 90°), thanks to the integrated legs and stand. The case utilizes real Z-Rails to ensure Eurorack compatibility. No sliding nuts or wrong spacing.

The Mantis case features a robust 3-zone Zeus power supply with integrated bus boards, offering 36 Eurorack keyed connectors, which simplify installation and ensure the correct power cable positioning. Up to three Mantis cases can be connected with optional studio brackets, creating a cost effect way to build a massive 624 HP enclosure.

Eurorack Powered Case, 2 x 104 HP    Lightweight: 6.5 lb    Uses Tiptop Z-Rails    Installed Zeus Power with Bus Boards    3-Zone Power, Each with +12V 1000mA    Powers Up to 36 Modules    Setup Positions: 0, 45, 90°    Dual Power Inputs for Flexible Positions    SyncBus Signal Distribution (Future Exp)

• Mantis has two rows of 104 HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.
• Module Depth: 2.0" (upper row), 2.4" (lower row)
• Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.
• With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the ±12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.
• Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing. It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.
• Weighing only 6.5 lb, Mantis is so light, traveling has never been so relaxed.
• Mantis Studio Brackets: Using the optional bracket accessory Mantis can be tripled up to 624 HP. Multiply your Mantis' and watch your studio setup grow.
• Optional Mantis Bag: Padded travel bag is designed as a backpack and uses waterproof material that keeps the elements out too. The bag opens up fully for easy access and features a padded interior to protect your Mantis and has enough room to add an optional Decksaver cover, which lets you transport your Mantis patched up to two Stackcables high.

Zeus Power

• The top row has two sections, A and B:
• Section A—Upper left side +12V 1000mA
• Section B—Upper right side +12V 1000mA
• Section C—The lower socket row +12V 1000mA
• The -12V and +5V are shared with all three zones

Dual DC Ports

• The power jack on top of your Mantis is for use when the case is lying flat. The power jack on the bottom of the back of the case is intended for use when setting the Mantis to the 45- or 90-degree upright positions. Using the bottom power jack when the case is upright allows the power adapter to lay on the table which prevents strain from the weight of a hanging power supply.

The SyncBus signal distribution connector offers the future possibility of synchronizing Tiptop Audio sequencers in separate Mantis cases with expanded capabilities compared to using simple patch cables. Although not fully developed, the SyncBus allows the Mantis case to be future-ready as Tiptop Audio develops these potential capabilities. Only connect to the external SyncBus connector using genuine Tiptop Audio products.

Related Questions and Answers

Q: 1. What is the thread for the knob that tightens the plate onto the base? I lost it and need a replacement

A: The thread size is not specified by Manfrotto, though this is the piece that would work for the Manfrotto MVH500AH Fluid Video Head with Flat Bass (B&H # MAMVH500AH): the Manfrotto R1036.48 Replacement Quick Release Plate Locking Knob for Select Manfrotto Video Heads and Video Monopods (5-Pack), B&H # MAR1036.48).

Q: 2. It has the knob on the right to tighten the plate and make sure it doesn't fall. Does it have a another safety lock to make sure the camera and plate doesn't fall off?

A: There is no safety lock on the plate itself. The Manfrotto 500 head has a knob that you twist and lock then you push down to allow the plate to slide on and off. When the knob is tighten and upright, the plate is locked in place.

Q: 3. Can you remove the head to use it on a slider?

A: Yes, the head on this tripod kit has a 3/8"-16 thread. You will be able to remove it and put it on a slider.

Q: 4. Will my 501 pl plate fit?

A: Yes, A 501 plate would make a great combo to this video head.

Q: 5. Will my Manfrotto 577 plate fit on this? I'm trying to easily switch from glidecam to tripod with the quick release.

A: yes it can work no problem

Q: 6. Canon R with bat. grip, Canon 70-200 with RRS lens plate, RRS clamp to head's plate. Will the battery grip hit the head?

A: No, you should not have an issue attaching the attaching your camera and lens to the Manfrotto MVH500AH.

Q: 7. can the head be detached?

A: Yes there is youtube video on how to detach Manfrotto tripod heads

Q: 8. Will the head take a Moza Air plate? They are interchangeable "sometimes"

A: Yes it will.

Q: 9. Will this work with a Sony FDR-AX53

A: Yes it will work fine. how ever I would use a smaller head for that camera.. as this head is pretty large for such camera.. Look for the smaller manfrotto head.... Things to look for are MAX payload.. your camera is approx 1.3lbs and this head is designed for up to 11lbs.. I would look for a smaller head closer to max payload of 4lbs for your style camera...

Q: 10. Would it be possible to use this with a heavier camera such as a c100?

A: Sure, I've even used a Scarlet W on it...