The portable ETC Response Mk2 Two-Port DMX/RDM Input Gateway, in white, provides data distribution using ETC's network technology. Designed for the Net3 protocol using industry-standard sACN, DMX, and RDM, the Gateway is offered as a solution that unlocks the power of your networked system.

DMX/RDM Data Distribution over Ethernet    For Net3 Protocol Using sACN, DMX & RDM    Touch-to-Wake Sensor    PoE/DC Power

• Distributes DMX and RDM data over Ethernet
• Supports Net3 protocol powered by ACN
• Onboard screen and controls for status and configuration
• Power and network status indicators
• Touch-to-Wake sensor
• Power over Ethernet (PoE) or external DC power supply
• Configurable using Concert Software

Related Questions and Answers

Q: 1. I need to record 4 xlr mics plus record a smartphone call and have the caller hear the conversation. is there an add-on I can buy to do this with the H8?

A: For that style of application, the H8 may not be the best option for your needs. I would suggest the Zoom L-8 mixer/recorder instead BH #ZOLTL8. This unit can accept up to 6 xlr mic in's, and is set up to accept a trrs input from a smartphone, and allow the caller to be recorded while sending a mix of the xlr mics to the listener.

Q: 2. Can I run 3 Sennheiser e609mics and 3 Shure SM57 mics?

A: Yes, the Sennheiser e609 and the Shure SM57 are both dynamic microphones that can be each connected to the six XLR inputs on the Zoom H8 digital audio recorder.

Q: 3. Can I run the line out of the Zoom H8 to an XLR house main to get the audio on their speakers for events?

A: The Zoom H8 is really not made to output to a PA system, as it has active mics on it, you would likely get a feedback loop. What kind of audio are you trying to output from your PA system?

Q: 4. Like H6, does it support Plugin-Power thru the 3.5 mm mic-input at the side of the top x/y microphones, and allow to adjust the phantom power voltage to 12v, 24v or 48v, etc?

A: It does support plug-in power through the 3.5mm jack on the stereo capsule. Phantom power is adjustable from 24 to 48v.

Q: 5. Can XLR connections be used as outputs to monitors?

A: No, the XLR jacks can only be used as inputs.

Q: 6. Hi! Does the Zoom H8 include the MSH-6 MS capsule which comes with the H6? Thanks

A: The Zoom MSH-6 - Mid-Side Microphone Capsule for Zoom H5 and H6 Field Recorders, BH #ZOZMSH6 is not included with the Zoom H8, but this microphone is compatible with the recorder, and can be purchased separately..

Q: 7. do you still need Cloudlifter using the shure sm7b?

A: It is recommended to use a Cloudlifter in line with the Shure SM7B into this recorder.

Q: 8. Why does it look like an ant?

A: It's unique design allows for a great modular setup which can now include a touchscreen and more mic pre-amp options.

Q: 9. Can you jam sync time code into this device?

A: The Zoom H8 does not have Time Code In or Out, so you would need additional gear to jam sync time code on this device. The Tentacle Sync Sync E Timecode Generator with Bluetooth (Dual Set), BH #TETE2 offers a very simple and reliable system, that can be connected to the 1/8-inch audio input of the XY-mic capsule, or into one of the XLR audio inputs with a Rode VXLR 3.5mm TRS Female to XLR Male Adapter, BH #ROVXLR, You do lose one audio channel to time code, but this would allow you to sync time code between the recorder and cameras in you productions.

Q: 10. Will the H8 include M/S decoding with a MSH-6 capsule, and will it be available in all three modes?

A: It will not include the M/S module in the box. Tthe MSH-6 module is fully compatible with it.