Stay protected and minimize downtime with the 1-Year Preferred Plus Service Plan for Home Theater Projectors from $700 to $999 from Epson. Providing one year of coverage, this manufacturer service plan includes parts and labor required to repair your product due to mechanical and electrical failures; defects in materials and workmanship are also covered. If your product fails during the coverage period, Epson will repair or offer a one-time replacement of your product. If the product is replaced, it will be a new or refurbished product of equal or similar features and functionality.

Please note that this plan must be purchased within the first 180 days of the standard limited warranty period. This plan is only available in the United States and excludes U.S. possessions. For replacement products, replacement service plans may be purchased up to 30 days after the replacement of the original product. This plan requires that the manufacturer's maintenance and care instructions are performed; not all breakdowns are covered.

For Epson Home Theater Projectors    Manufacturer Service Plan    Includes Parts & Labor    Covers Mechanical & Electrical Failures    Covers Materials & Workmanship

Related Questions and Answers

Q: 1. Can a fluid head be mounted on this tripod for better video performance? If so, any recommendations?

A: The Digital Balance Pro is an excellent video head for these legs.a href= http://www.bhphotovideo.com/c/product/825418-REG/Daiwa_Slik_618_665_Digital_Balance_Pro_Fluid.html target= _blank http://www.bhphotovideo.com/c/product/825418-REG/Daiwa_Slik_618_665_Digital_Balance_Pro_Fluid.html/a

Q: 2. Will the 3way head support the Photek TRI-X-2500 Tripod Extender with a light weight camcorder or camera. I'm concerned about the quick release. Will everything work together?

A: This tripod has a load capacity of 19.8 pounds. It should be able to handle the weight of a small camera or camcorder and B&H # PHT2500. However we suggest that you use a sandbag on the other side that the camera is not on to keep the tripod balanced. An option that you can fill yourself, as you may not need a full 5 pounds, would be the ideal choice for that. https://bhpho.to/2K5SHpe

Q: 3. Will this work with a Nikon d5300?

A: It sure will.

Q: 4. Can you elaborate about the pan head? Also can I replace the pan-head with a ball head for this tripod? I would also like to know if this tripod model's legs are the same as http://www.bhphotovideo.com/c/product/557127-REG/Slik_615_317_700DX_Pro_Tripod_Legs.html

A: Here is the direct link to the head itself. Please see the following link:http://bhpho.to/1hJ65rDThe legs are the same as the Slik 615-317 and you can replace the head with any other brand or model tripod head that uses a 1/4-20 or 3/8-16 thread mount.

Q: 5. Can it be used as a travel tripod?

A: The Pro 700 DX tripod is not really considered a travel tripod, as it weighs in at just over 7 lbs, and only folds to just under 30 inches. A better travel tripod would be something like one of the Pro 340 series.

Q: 6. can a slider be mounted on this?

A: I actually just recently used this tripod in a film. I was using a pretty stripped down Black Magic URSA Mini 4.6k. I mounted a three foot slider on the tripod but found that the camera was a bit too heavy, and as the camera moved away from the center of the slider, the tripod head began to have trouble supporting the full load. So I used two C-Stands on either side to support the ends of the slider. However, if you're using a DSLR or another light weight camera, I don't think you'd run into that problem. It's a really sturdy tripod, but the head is just not made for extremely heavy loads.

Q: 7. Can I use an extension arm with this for flat lay photography?

A: Certainly, just unscrew the head and attach a lateral arm to the legs and then reattach the head to the end of the lateral arm. Click the link below to view your options; https://www.bhphotovideo.com/c/buy/Arms/ci/10829/N/4075788750

Q: 8. Can tripod be used for macro photography?

A: Yes, it can. The center column can be split in two and then reversed, so the head will hang between the legs.

Q: 9. What does it weigh?

A: 3lbs or so

Q: 10. Will this work in a DN-400?

A: This is pacifically designed to work with DN600/700 and HDR-60/70 recorders.