You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Ld Systems Anny Bp Wireless Bodypack Transmitter For Anny Pa System (b47: 470 To 490 Mhz)

Ld Systems Anny Bp Wireless Bodypack Transmitter For Anny Pa System (b47: 470 To 490 Mhz)
  • Product Code: ga223595
  • Availability: In Stock

$374.97 $547.46

The ANNY BP from LD Systems is a wireless bodypack transmitter designed for use with ANNY 10 and ANNY 8 PA systems equipped with the ANNY R wireless receiver module. The transmitter operates in the 470 to 490 MHz band in the UHF range and features 10mW of RF output power, helping to ensure reliable performance at a range up to 262'. Its 3-pin mini XLR connector (TA3M) supplies 5V plug-in power and accommodates a wide range of compatible lavalier and headset microphones (available separately), including the WS 100 MH 1 headset from LD Systems.

The unit syncs quickly and easily to the receiver via infrared and will run for up to 8 hours on the 2 supplied AA batteries. A status LED glows white when switched on and red when the battery is low. The power switch also provides a standby function for temporary muting, ideal when you want to take a quick break without having to switch the unit off completely.

For Use with ANNY 10 and ANNY 8 Systems    Requires ANNY R Wireless Receiver Module    Reliable UHF Wireless Performance    TA3M Input for Microphone or Instrument    3-Stage Gain Sensitivity Adjustment    262' Range    Standby Mode    Status LED    Runs 8 Hours on Included AA Batteries    IR Frequency Sync with Receiver

General
CompatibilityLD Systems ANNY ANNY R
Inputs / Outputs
Audio I/O1x Mini-XLR 3-Pin Hi-Z/Instrument/Line/Mic Input
Wireless
WirelessUHF
*Built-In
Mobile App CompatibleNo
Power
Power SourceBattery (Included)
Battery Type2x AA
Environmental
Environmental ResistanceNo
Physical
MountingBack: 1x Belt Clip
ColorBlack
Dimensions3.9 x 2.5 x 0.8" / 100 x 64 x 21 mm
Weight3.17 oz / 0.09 kg

  • Bodypack transmitter with 2 AA batteries
  • For use with ANNY PA equipped with wireless receiver module
  • Up to 262' range
  • TA3M Mini XLR input for microphone or instrument cable
  • 8 hours operating time
  • Input level switch (MIC, 0 dB, -10 dB)
  • Standby mode
  • Integrated status LED

Related Questions and Answers

Q: 1. I have a D-Tap to NPF cable I use to power my current Feelworld monitor. Would using this cable be sufficient in powering the monitor or does it require both battery slots to use it?

A: The following unit requires two batteries to power own.

Q: 2. Can 4k or higher resolution be transmitted to FHD through the app to an Ipad?

A: Yes, You can send HD or 4k content to the Hollyland app. This kit supports - Transmitter to 1 receiver + 2 apps or Transmitter to 4 apps.

Q: 3. how good is this for pulling focus?

A: The Hollyland Mars 4K Wireless Video Transmission System has a latency of 0.06 sec.

Q: 4. Can this transmitter be used with kit, I need two transmitters and one receiver?

A: The Hollyland Mars 4K Wireless Video Transmitter is a 1 to 1 system, meaning one transmitter sends to one receiver. You can connect 4 additional phones/tablets from a non real-time view of what is being transmitted.

Q: 5. How many receivers can be used simultaneously with thee Hollyland app? Can I use a transmitter with two receivers plus one app?

A: The Hollyland Mars 4K Wireless Video Transmission System can never use more than one (1) receiver as it is a 1-to-1 system.

Q: 6. can the antennas be removed and extended via an sma cable?

A: For the Hollyland Mars 4K Wireless Video Transmission System, the antennas aren't removable.

Q: 7. Is it true that one transmitter can transmit to two receivers plus one M1 monitor all at the same time?

A: The Hollyland Mars 4K Wireless Video Transmission System can work with up to 4 apps, two receivers and no apps or one receiver and 2 apps. It does not have any app support when working with two receivers.

Q: 8. Can this accept and output 4k 23.98p? I've had other Hollyland products round to 24fps and it wouldn't work with my switcher because of that.

A: The Hollyland Mars 4K would still output 24p in 4k. Only when you are using the SDI input would the kit support 23.98p and then output 23.98p( SDI/HDMI) However this is 1080p.

Q: 9. Can i use 2 or more recevers side by side or do they require a minimum distance between them?

A: The Hollyland Mars 4K Wireless Video Transmission System do require a minimum distance of 2M to ensure that there would be no interference.

Q: 10. Would this be compatible with any receiver? Like a feelworld receiver+monitor combo?

A: The Hollyland Mars 4K Wireless Video Transmitter would work with the following Receiver. It would not work with other Brands. The Mars 4k transmitter can also output to the Hollyland Mars M1 5.5" Wireless Transceiver Monitor. Hollyland Mars 4K Wireless Video Receiver BH #HOHLMARS4KRX Hollyland Mars M1 5.5" Wireless Transceiver Monitor BH #HOMARSM1

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Gator Gm-2w 2 Wireless Systems Bag

$254.97 $390.10

Products You May Like

Ewa-marine Vvc Underwater Housing

$597.00 $728.34

Avalon Design Vt-737sp - Channel Strip

$11,598.00 $14,033.58

Peak Design Travel Backpack (sage, 45l)

$899.85 $1,142.81

Thronmax P2 Metal Suspension Shockmount

$74.70 $119.52