10/100 Mbps Ethernet Cable

Pelco Fmci Series Fmci-af1sm1st 10/100 Mbps Ethernet-optical Fiber Media Converter With St Connector

Product Code: ga22373
Availability: In Stock

$1,255.26 $1,619.29

Qty

2 reviews Write a review

Description
Reviews (2)

The FMCI Series FMCI-AF1SM1ST 10/100 Mbps Ethernet-Optical Fiber Media Converter from Pelco is designed to transmit 10/100 Mbps data over single-mode optical fiber with ST optical connector. The electrical interface will auto-negotiate to a 10 Mbps or 100 Mbps Ethernet rate without any adjustments and the optical interface operates at a 100 Mbps Ethernet rate. This FMCI series media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status and monitoring critical operating parameters.

Data
Number of Channels	1
Data Interface	Ethernet
Data Rate	10/100 Mbps
Operating Mode	Electrical Port: Full duplex or half duplex Optical Port: Full duplex
Optical
Connector	ST
Number of Fibers	1
Mode	Single-mode
Wavelength	1310/1550 nm
Power Budget	15 dB
Transmission Distance	12 miles (20 km)
Electrical
Power Input	8 to 24 VDC
Current Protection	Automatic resettable (solid state current limiter)
MTBF	>100,000 hours
LED Indicators	Optical link, data; electrical link, data; power
General
Connectors	Power: Terminal block TCP/IP: Port RJ-45
Number of Rack Slots	1
Certifications	CE, Class A; FCC, Class A; UL/cUL listed; C-Tick; RoHS; IEEE 802.3; designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards
Operating Temperature	-40 to 167°F (-40 to 75°C)
Storage Temperature	-40 to 185°F (-40 to 85°C)
Relative Humidity	0 to 95%, non-condensing
Dimensions	6.1 × 5.3 × 1.1" (15.5 × 13.5 × 2.8 cm)
Weight	1.0 lb (0.5 kg)
Packaging Info
Package Weight	1.05 lb
Box Dimensions (LxWxH)	9.8 x 4.5 x 2.5"

10/100 Mbps Ethernet (10Base-T/100Base-TX electrical port; 100Base-FX optical port)

Electrical port supports auto-negotiation for 10 Mbps or 100 Mbps, full-duplex or half-duplex data

Optical port supports 100 Mbps full-duplex data

Automatic MDI/MDI-X (medium dependent interface/medium dependent interface crossover) operation

Single-mode fiber support for distances up to 12 miles

Transparent to data encoding/compatible with major data protocols

Designed to meet NEMA TS 1/TS 2, and Caltrans traffic signal control equipment environmental standards

ST optical connector

1-fiber design

Flexible option for operating AC/DC power

Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events

No performance adjustments required

LED status indicators for monitoring all critical and normal operating parameters

Standard size is hot-swappable in the card cage

Compliant with IEEE 802.3 standard

Related Questions and Answers

Q: 1. Does this support a bidi SFP? If so which one/which brands would be compatible?

A: The StarTech Gigabit Ethernet Fiber Media Converter BH #STMCM1110MML does not support BiDi SFP.

Q: 2. Is this compatible with the Blackmagic Design BMD-CONVMOF, the standard Optical Fiber Mini Converter?

A: Yes, it's compatible.

Q: 3. Is the bidirectionality simultaneous? Or is it one or the other?

A: The Blackmagic Design Mini Converter Optical Fiber 12G-SDI is multi-rate and has bidirectional capability.

Q: 4. Does this aplifying the SDI signal or just transsfering?

A: This mini converter converts SDI to optical Fiber and will also convert optical fiber back to SDI. For long runs, you can have one at each end or directly connect fiber to many of the Blackmagic products.

Q: 5. Can this run off a battery?

A: Yes. Comes with an AC to 12V DC power supply so you can run on 12V DC if you do not have reason to use any other voltage within the specified 6-36V DC. Just be careful not to mix the polarity, I am not sure its reverse polarity protected.

Q: 6. Does this support tally data?

A: Yes, it does. The tally, signal will come in the return feed from an Atem Switcher to any number of Black Magic Cameras & Studio Viewfinders. The Mini Converter Optical Fiber 12G, will pass the signals: Both SDI to optical and optical to SDI. It will pass the Tally information that is embedded in that signal, that comes from an Atem switcher passes through the Mini Converter Optical Fiber and then to a supported Blackmagic Camera. ( URSA Broadcast/ URSA Mini Pro / Studio Cameras / Pocket Cinema Cameras).

Q: 7. Will this work with Multi Mode fiber? Has anyone tried?

A: I have not tried this, but the adapter does not come with a SFP module so it would be worth a try. They recommend SMF because it loses less than MMF. I used 10Gtek 10G-SFP-LR modules and they work great. Blackmagic says it works with any SFP modules so I imagine it will work with MMF but no guarantees.

Q: 8. Does this support Talkback on the ATEM TV Studio 4K?

A: Yes it is compatible with the ATEM Talkback system.

Q: 9. Is this compatible with Blackmagic Design ATEM Camera Converter?

A: Yes, it is compatible with the ATEM Camera Converter. You will still need to get the Optical Module Adapter separately.

Q: 10. Is there a rack shelf accessory for this?

A: The ShieldRock Rack10 works well. You can also add-on a single power supply, power splitters, and DC barrel cables if you want it all super-organized.

Dave	21/09/2024
Works fine. Seems like a quality piece. 5

anyonymous	09/04/2024
Using this to connect two Behringer S16 digital stage boxes to an X32 mixer. Ver easy to connect, wrap and store, and the metal housing on each end is very sturdy. 5