The ESE LX-5112 wall-mount analog clock features a 12" viewing diameter in a 14" square housing. It functions as a timecode reader, standalone clock, and an impulse clock. The clock reads, decodes, and displays time and SMPTE/EBU, ASCII, or ESE timecode information from just about any master clock or other timecode source. DIP switches on the back allow you to change the timecode mode.

The self-setting clock features a battery backup option, an automatic time zone offset, and a silent second hand, and it can sync using the master clock's power or by using its internal crystal oscillators. The clock can be viewed from up to 60' away.

Silent Analog Slave Clock    Reads Timecode from Master Clock    SMPTE/EBU, ESE, or ASCII Format Support    12" Diameter, Time Zone Offset    Standalone, Impulse, and Reader Modes    Wall Mountable, 60' Viewing Distance

• Silent operation
• Simple setup; self-setting with timecode input
• Reads ESE, ASCII, or SMPTE/EBU timecode
• Standalone, Impulse, and Reader modes
• Second hand can be set to sweep or step
• 12" diameter clock face, 14" square housing
• 60' viewing distance
• Battery backup
• Time zone offset
• Timecode loss indicator

Related Questions and Answers

Q: 1. Does this remote trigger work only with Ikelite strobes? How about Sea and Sea YS-D2?

A: The Ikelite High Sensitivity Optical Slave Converter is ONLY compatible with Ikelite DS series strobes. This slave trigger plugs into the sync cord port on Ikelite DS strobes. All current Sea & Sea strobes have a built-in optical slave trigger so there is no need for a optical slave converter

Q: 2. Hi- I need replacement sync cords for these lites. Can anyone tell me exactly what sync I need to buy? Thanks! BTW- Using with a Canon 70D

A: The light takes a Mini stereo camera PC plug or if you are using Pocket wizards than Mini Stereo to Mini Stereo

Q: 3. Can it be used as digital photo frame?

A: Lenovo Smart Display has one clock face, that can display Google Photos. So yes, it can display your photos, but it's not a traditional photo frame.

Q: 4. Does it work in Middle East

A: Yes, you shouldn't have any issues with this unit in the Middle East.

Q: 5. How long is the power cable that comes with this unit & can I buy a longer cable?

A: The sync cable included with the Photogenic PG20M Slave Light AC Master is approximately 3 feet. You can extend this by using an Impact Sync Cord Male PC to Female PC (3'), BH # IMPCMPCF3. https://bhpho.to/3xX6CFS

Q: 6. I was wondering what I would need to connect this light to a pocket wizard ?

A: A PocketWizard MPCF-L PC Sync to Miniphone Adapter B&H # WIMPCFL can be connected to your Pocket Wizard unit using the sync cord included with your 45i FlashLite Slave/Master Flash.

Q: 7. Can we control multiple LX-991U displays from our ESE ES-362U master clock using a simple BNC T connector?

A: Yes, the ESE ES-362U master is capable of driving up to 100 slave displays via BNC, including the ESE LX-991U Timecode Remote Display ("LX" Enclosure) through a BNC-T connector or for long runs, using a distribution amplifier such as the ES-243. See the link below: https://bit.ly/3DQQ5GZ

Q: 8. Can you stream a local radio station, for example to wake up to the radio?

A: Yes as others have said, to do this you need to set up a routine in the Google home app.

Q: 9. Will this work with an argus c3 flash dome?

A: It can but its hit and miss weather your master flash registers with the sensor to get the slave flash effect to work. These flashs are a nice backup. They are cheap and you can find uses for them but dont rely on them to be a main light source.

Q: 10. does this have a battery backup?

A: Hi Carol! No, the Lenovo Smart Clock with Google Assistant does not have a battery backup. Repeating alarms are stored in the event of a brief power outage. Previously set alarms are stored in the event of a Wi-Fi Outage.