The Shure QLXD1 is a bodypack digital wireless microphone transmitter compatible with QLX-D receivers. With rugged, yet lightweight aluminum housing, it delivers pristine audio quality, reliable RF performance, and AES 256-bit encryption for secure transmission. The transmitter is well suited for sound-reinforcement applications in medium-sized venues and houses of worship as well as A/V installations in conference, educational, and corporate facilities.

The QLXD1 operates on a 64 MHz UHF tuning range with 2560 selectable frequencies available. It provides up to 9 hours of operation on two AA batteries, with a selectable 1/10mW RF power output and a transmission range up to 330'.

For Presenters and Performers    SM58 Dynamic Cardioid Mic Capsule    Low-Profile Lav Mic with TA4 Connector    Switching-Diversity Rackmount Receiver    1760 Auto-Scan Frequencies    Selectable 1/10mW RF Power    Adjustable Gain Control    Interchangeable Capsule Design

• The QLXD1 features a TA4M input, allowing you to connect a lavalier or headset mic of your choice for hands-free presentations and performances, or a dedicated WA305 locking instrument cable for use with a guitar/bass (mic and cable available separately).
• The unit quickly syncs with a wireless receiver via infrared at the touch of a button.
• The adjustable input sensitivity on the transmitter accommodates mic levels ranging from booming voices to quiet speech.
• Frequency and power lockout functions prevent accidental or unauthorized changes during events.
• A backlit LCD with easy-to-navigate menu and controls lets you quickly access frequency, group, and channel settings, along with mute and lock status, and RF output.
• 1/10mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Detachable 1/4-wave antenna.

• Operates for up to 9 hours on two AA batteries.
• Optional Shure SB900A lithium-ion rechargeable battery pack offers intelligent power management with over 10 hours of battery life, precision metering in hours and minutes, and zero memory effect.
• External charging contacts allow for docked battery charging with the SBC200 dual-docking charger (available separately).
• The networkable SBC220 charger (available separately) allows for remote power monitoring via Shure’s Wireless Workbench software.

Related Questions and Answers

Q: 1. How i need to. put Zhiyun crane 3s on this? any adapter?

A: No, unfortunately the Tilta Float Handheld Gimbal Support System for DJI RS 2 (V-Mount) (BH# TIGSST01V) is designed to be used with the DJI RS 2 only and there is no adapter available for it.

Q: 2. What size v-mount batteries should be used with a BMPCC4K with frame?

A: A 98Wh is a great option and a standard size. https://bhpho.to/2Pno7fC

Q: 3. Can I also power the camera while powering the RS2?

A: Yes you can.

Q: 4. If I add a monitor to this setup using the supplied monitor arm, Do I have to run SDI/HDMI cables to the Camera, or is there a smarter way to run the necessary cabling?

A: Yes, you would need to run a cable.

Q: 5. What type of stand can be used to balance this other than a C-stand? And the float comes with an adapter to sit on top?

A: The Tilta Float Handheld Gimbal Support System for DJI RS 2 (V-Mount), features a 5/8" (babypin) mount, which will fit on a C-stand or most standard lighting stands. However, we would recommend a C-stand to hold the weight properly or another type of heavy duty light stand, such as a Matthews Light/Heavy Triple Riser Kit Stand (12.4'). https://bhpho.to/3gpFruD

Q: 6. May I know the yoke diameter that fits the Tilta Float's post? Intending to use it with other vest and arm.

A: Center Column Diameter 0.5" / 12.0 mm Number of Sections 2 Depth 13.6" / 34.5 cm Width 8.3" / 21 cm Weight 22 lb / 10 kg For additional unpublished specifications, please contact Tilta directly: Tilta: Tel: 818-561-4991 Email support@tilta.com

Q: 7. If I were to purchase this, what other items do I need to purchase to also use it as a dual handle system?

A: The Tilta Float Handheld Gimbal Support System for DJI RS 2 (V-Mount) comes with the support vest and arm that holds up the sled. One hand can be on the yoke to control the z-axis, and the other hand can be on the sled to control the pan and the tilt.

Q: 8. Does it adjust the balance if using a zoom lens, like a gimbal does?

A: Yes it does. Photography lenses that physically get longer/shorter as you zoom in and out will shift the weight balance. Internally zooming lenses affect the balance to a much smaller degree. In general if you balanced the camera rig properly zooming in/out should not affect the gimbal enough to require rebalancing. The gimbals have some ability to compensate for being slightly out of balance thus zooming in/out should not present a problem (again if balanced properly).

Q: 9. Can I use this with the Ronin S?

A: Yes. But the unit is designed to take over full control of the RS2 not the RS unit.

Q: 10. Can you switch the provided vest with the Tilta Tiltamax Armorman 3.0 Support Vest? It seems like this one would be more comfortable.

A: Unfortunately we nor Tilta, offer a configuration with the Tiltamax Armorman 3.0 Support Vest.