Control a multitude of devices, such as video displays, audio amplifiers, lights, and more with the KC-Virtual Brain1 Hardware Platform with 1 Instance of Kramer BRAINware from Kramer. The versatile compact device comes with a single instance of BRAINware software already installed and enables control for one standard space that can include a scaler, monitor, lighting system, touch panel, and a keypad via the wide range of connectivity options that include HDMI, USB-A, and Ethernet.

The enterprise-class, user-friendly application facilitates room control functions from a computer without the need for installing additional gear between your interface and the controlled devices. A fully customizable UI allows you to quickly personalize your control interface to desired settings, and the simple configuration allows you to be up and running in minutes.

Hardware Controller with BRAINware    Fully Customizable UI    HDMI, USB-A & Ethernet Connectivity    Enables Control of Almost Any Device    Simple Configuration

Related Questions and Answers

Q: 1. I would like to use this to position a small camera for use as a web cam. Could I use a SuperClamp to mount this to a table to position the camera?

A: Yes, you may use a Super Clamp with the Manfrotto 196B-3 Articulated Arm - 3 Sections, With Bracket for your stated usage needs. Just ensure your camera has a standard 1/4"-20 female tripod socket on the bottom of the camera for use with the included bracket.

Q: 2. Does this have to be surface mounted or does it just sit atop the desk?

A: It sits atop a flat surface pretty well, I've never had a need to secure it and I use it with my fairly heavy Canon 70D and kit lens. It does have holes though, so you could screw it down or even a c-clamp would hold it if needed.

Q: 3. Is this leveling base compatible with the Sirui 3203 (now 3204) tripod, which has a 75 mm bowl?

A: Yes, If the Sirui tripod has a 75mm bowl fitting the Leofoto YB-75LP 75mm Leveling Base would work.

Q: 4. Will the this short handle fit and operate with the TVC-34L at its lowest (on the ground) leg position? Im seeing mixed details about it. It says its a 2.5 handle which should work but, the specs say its 3 which from what I calculate, wouldn't work.

A: The TVC-34L at it's lowest gets the top of the plate down to 4 / 10.16 cm. The Really Right Stuff TA-3 Leveling Base with Short Handle and Platform with 3/8 -16 Stud B&H # RETA3LB MFR # TA-3-LB has a total height (excluding stud): 4.9 / 124mm. The handle on it comes with no hook and is 2.5 / 63.50mm. RRS states these handles do not significantly impact your ability to drop the tripod to ground level. If you are still concerned, RRS has the Really Right Stuff TA-3 Leveling Base with Low-Profile Knob and Platform with 3/8 -16 Stud B&H # RETA3LBLP MFR # TA-3-LB-LP just for you. Its total height (excluding stud): 3.4 / 86mm. Get down baby.

Q: 5. Is the adjustment wheel/nut small enough to allow full adjustment of the the view screen on the Sony A-6000?

A: Yes, you can, but this tiny ball head is a bit small to secure an A6000 with anything but its tiny lenses. I'm referring to the holding power of the ball. The tilt screen will be fine.

Q: 6. what is the mount attached under the platform in the photo description? Do you carry the part?

A: The Arca-Swiss mount on the bottom of the Oben TLSP-1614 Tripod and Light Stand Platform (16 x 14") is built into the platform and is not available separately.

Q: 7. What are the accessories needed for holding a reflector, and also for a flash? Thank you

A: To attach a shoe mount flash to one end of this arm, you can use the Manfrotto 143S Flash Shoe for Magic Arm B&H # MA143S. If the reflector was 12 or under, you could attach the Manfrotto 175 Spring Clamp B&H # MA175 on one end of the arm. If you intend to use a reflector that is about 22 or larger, a dedicated reflector arm and stand would be recommended such as the Impact Multiboom Light Stand and Reflector Holder, B&H # IMLSRH. Please see the images below for reference.

Q: 8. Does it include a phone holder ?

A: No, the Glide Gear OH 100 Adjustable Overhead Camera Platform does not include a phone adapter. You would have to purchase one separately. If you need a recommendation, the Sunwayfoto Smartphone Bracket for 2.2 to 3.6" Phone, B&H # SUCPC01, would be a well-built item that also allows you to adjust the angle/position of the smartphone on the overhead camera platform.

Q: 9. What is difference between this and OH 100? What is distance between legs and what is height?

A: The Glide Gear OH 200 will provide a maximum height of 36inches, width of 34.5inches, maximum payload of 5lbs and will not require C-stands. The Glide Gear OH 100 has a maximum height of 27inches, width of 34inches, the maximum 10lb payload and will not require c stand.

Q: 10. Does this platform include the pictured mount?

A: The Arca-Swiss mount on the bottom of the Oben TLSP-1614 Tripod and Light Stand Platform (16 x 14") is built into the platform and is not available separately.