You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Core Swx Pmc Plate Kit With I/o Module For Sony Burano (v-mount)

Core Swx Pmc Plate Kit With I/o Module For Sony Burano (v-mount)
  • Product Code: ga224067
  • Availability: In Stock

$3,447.00 $4,170.87

The V-mount PMC Plate with Input/Output for Sony BURANO from Core SWX provides both hot-swap power transitions and additional power outputs for your BURANO or VENICE camera. This plate features a 4-pin XLR DC power input, a USB-C Power Delivery output, a 4-pin Hirose output, and two D-Tap outputs. A side screen displays vital status information.

Power Management Control Plate    Power Breakout Module for BURANO    LEMO, D-Tap, R/S, Hirose Outputs    4-Pin XLR DC Input, Hot-Swap Capability

Key Specs
Maximum Load45 W
Power OutputP-Tap: 11 to 16.8 VDC
USB-C: 5 to 20 VDC
Hirose 4-Pin: 12 VDC
Camera Power MethodBattery Plate Mount Type, Connector
Plate Front / Battery MountV-Mount
Hot-Swap SupportYes
Power
Power InputXLR 4-Pin: 11 to 17 VDC
Maximum Load45 W
Power OutputP-Tap: 11 to 16.8 VDC
USB-C: 5 to 20 VDC
Hirose 4-Pin: 12 VDC
General
Camera Power MethodBattery Plate Mount Type, Connector
Inputs/Outputs2x P-Tap
1x USB-C
1x Hirose 4-Pin
Plate Front / Battery MountV-Mount
Plate Rear MountV-Mount Battery Plate
Number of Battery Bays1
Hot-Swap SupportYes
Weight1.3 lb / 590 g
Packaging Info
Package Weight1.245 lb
Box Dimensions (LxWxH)6.7 x 5.8 x 3.6"

  • Sony BURANO cinema camera
  • Sony VENICE cinema camera

Related Questions and Answers

Q: 1. Do I need a v mount charger to charge these or a cable will do?

A: You will need a v-mount charger of some sort, either a cable variety like the Core SWX PB70C15 D-Tap Wall Charger (BH #COPB70C15 • MFR #PB70C15) or a standalone unit like the Core SWX GPM-X2S Mini Dual Travel Battery Charger - V-Mount (BH #COGPMX2S • MFR #GPM-X2S).

Q: 2. Are these suitable to power a fully built Alexa Mini if I used two of the batteries at a time? I am looking to use these batteries on a steadicam rig.

A: Yes. That is correct. The HyperCore NEO Slim 98Wh Gold Mount 2-Battery Kit with GPM-X2A Dual Charger will work with an Alexa Mini setup.

Q: 3. Will this work with the Sony FS7 XDCA?

A: This product allows you to use Gold Mount Batteries on a system with a V-Mount Battery Plate. It should work with the FS7's XDCA Extension Unit.https://bhpho.to/2fvCw4w

Q: 4. Are the 15mm rod mounts on the top plate removable?

A: Yes, the 15mm rod mounts on the top plate are removeable.

Q: 5. Does this (in v-mount) have 2 or 3 D-taps on it? Tilta’s website says two, here says three… some photos show three, others two??

A: The Tilta Battery Plate for Sony FX6 Type II (V-Mount) has 3 D-Taps on it.

Q: 6. What's the runtime for one of these batteries on a Red Weapon Helium or Similar model?

A: RED Weapon Helium draws approximately 50 watts when configured with the DSMC2 Base Expander, DSCM2 Red Touch 7", and Red Mini Mag 512GB. One can expect expect close to 2 hours runtime with the Core SWX HyperCore NEO Slim 98Wh V-Mount.

Q: 7. How does this compare against the Hypercore Neo 9 Mini other than its slimmer form factor and USB port? In other words, what would make someone pick the Mini over the Slim?

A: The Hypercore Neo 9 Mini and Hypercore Neo Slim in the 98w versions are of the same capacities and specs for output and draw. The Neo 9 Mini tends to fit better on RED cinema cameras and other cinema bodies without blocking any of the fans or sticking out above the camera body.

Q: 8. Hi, I lost a thumb screw for this, Can you please tell me what screw/product would I purchase as a replacement please? Thanks

A: The thumb screws on the Tilta Battery Plate for Sony FX6 Type II (V-Mount) are M3 (6mm) screws.

Q: 9. Would two Core SWX Hypercore NEO Slim 98Wh Lithium-Ion Battery (V-Mount) work to power my Godox VL300 Video Light at 100% of light brightness? If so, for how long on two batteries will last?

A: Two Core SWX Hypercore NEO Slim 98Wh Lithium-Ion Battery (Gold Mount) will run a Godox VL300 LED Video Light at full power for under an hour.

Q: 10. Can the mount point be moved to the bottom? My rods ar eon the bottom of the camera.

A: No, We suggest working with another solution for your rig model. The Tilta Battery Plate for Sony FX6 Type II is designed to attach to rods from the top of the cage. IndiPRO Tools V-Mount Battery Adapter Plate with 15mm Rod Mount for Sony FX6 (24") BH #INVMPFX6

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Ikan Ich-945 Battery Charger

$59.85 $92.17

Hypergear Usb Type-c 27w Car Charger

$89.97 $135.85

Aver Dc12v Power Adaptor/power Cord

$116.76 $152.96

Futaba Dlph-1 Dual-link Power Hub

$599.97 $869.96

On-a-roll Lifter 61595 Power Jumbo Model

$16,186.50 $25,412.81

Sabrent Usb 3.0 Sharing Switch

$44.97 $65.66

Products You May Like

Dot Line Quick Focus Handle (black)

$38.85 $57.11

Altronix Ultra Sensitive Relay Module

$55.35 $81.36

Crown Audio Xti 4002 Power Amplifier

$4,077.00 $6,237.81

Exell Battery Cr1/3n 3v Lithium Battery

$11.85 $16.71

K&m 24471 Speaker Wall Mount (white)

$323.97 $398.48

Arri Crew Belt (small)

$153.00 $223.38

Tiffen 72mm 80a Color Conversion Filter

$104.85 $150.98