Mount accessories and add mounting options to your RED KOMODO-X cinema camera with the black Full Camera Cage from Tilta. The modular cage is made up of different components that can be added and removed as needed, including left/right side panels, a bottom plate, a top/front plate, and a top/rear plate that secure directly onto the camera. The components provide a shoe mount, NATO rails, two ARRI-style rosettes, 1/4"-20 threads, and 3/8"-16 anti-twist threads.

A dovetail plate is included to mount the camera onto an optional baseplate, and a lens adapter support is also included to add support for heavier lenses. Other optional Tilta accessories for this cage include a top handle, a 15mm or 19mm LWS baseplate, a battery plate, a monitor mount, and more.

Modular KOMODO-X Full Camera Cage    Lightweight Top Handle    Left-Side Wood Handle with NATO Adapter    Lens Adapter Support

The camera cage includes five parts: Front Top Plate, Left Side Arm, Right Side Arm, Bottom Plate, and Rear Top Plate. Each part is detachable and can be used independently.

Related Questions and Answers

Q: 1. On the BMPCC 6K Pro there is only 1x USB C port, how do you use the handle with the run/stop cable while still being able to record to the ssd?

A: If you are using the handle, then you will be limited to recording internally. It is either one or the other.

Q: 2. Can you use the add-on battery pack with this setup?

A: Included with this kit is the Tilta Left-Side Advanced Power Handle with Run/Stop (TITALRH57B), which takes a NP-570 battery. Additionally, this cage kit includes a piece for an alternate configuration, that will support the Pocket 6K Pro Battery grip (BLPKCAMPGRIP).

Q: 3. Does this cage fit on the BMCC 6k FF Leica mount?

A: The Tilta Basic Camera Cage Kit for BMPCC 6K Pro/G2/BMPCC 6K (Black) does not fit the BMCC 6k FF camera. Tilta came out with a new version. It is BH #TIAT64FCCB, https://bit.ly/3HSdyco.

Q: 4. What adapter is need to mount the Tiltaing 15mm LWS Baseplate Type VI to a Manfrotto 502AH with the 504PLONG Quick Release?

A: No adapter is needed to mount the Tilta Tiltaing 15mm LWS Baseplate Type VI (Black) included in the Tilta Advanced Camera Cage Kit for BMPCC 6K Pro/G2/BMPCC 6K (Black) to a Manfrotto 502AH Pro Video Head with Flat Base with the Manfrotto 504PLONG Long Quick Release Mounting Plate. The baseplate has several 1/4"-20 and 3/8"-16 mounting points on the bottom that would allow for attaching the quick release plate. You can see those mounting points here: https://bhpho.to/3TG61na Using a second screw such as the Manfrotto Set of Two 1/4" Camera Mounting Screws, BH #MAR116.138, would be recommended.

Q: 5. Can the battery holder be positioned so as to not interfere with the 6K pro EVF?

A: The Tilta Basic Camera Cage Kit for BMPCC 6K Pro/G2/BMPCC 6K (Tactical Gray) will not accommodate the EVF being used on the Blackmagic pocket 6k PRO.

Q: 6. This cage fit for Blackmajick 6 G2 ?

A: Yes, the Tilta Advanced Kit for Blackmagic Design Pocket Cinema Camera 6K Pro (Tactical Gray) is compatible with the Blackmagic Design Pocket Cinema Camera 6K G2.

Q: 7. Is this compatible Blackmagic cinema camera 6k full frame?

A: The Tilta Advanced Camera Cage Kit for BMPCC 6K Pro/G2/BMPCC 6K (Tactical Gray) is not listed as compatible with the Blackmagic Design Cinema Camera 6K (Leica L). With any cage, if the camera is not listed, compatibility is unlikely.

Q: 8. Can the handle rotate/spin to accommodate low or high angle shots?

A: The Tilta Advanced Kit for Blackmagic Design Pocket Cinema Camera 6K Pro (Tactical Gray) (B&H# TITAT11A) comes with a Tilta Left-Side Advanced Power Handle with Run/Stop (F570, Tactical Gray) (B&H# TITALRH57). There is a button on that handle that may be depressed to release the lock on the handle and thereby allow it to rotate. It is recommended only to do so when the handle is attached to the cage as that will make it easier to manipulate.

Q: 9. why the t7 ssd bracket where the BMPCC6kpro does not support that drive. does a t5 fit or are they different form factors?

A: That's a typo. It should be labeled as "a holder for a Samsung T5 SSD". The T5 and T7 have the same form factor.

Q: 10. I just bought this and can't seem to make the run and stop functioning work on my bmpcc 6k pro and can't find anything on this issue

A: The run/stop feature on the Tilta Left-Side Advanced Power Handle with Run/Stop part of the Tilta Advanced Camera Cage Kit for BMPCC 6K Pro/G2/BMPCC 6K, requires the USB-C cable to be tethered to the camera.